NEW LONG TUBE HEADERS.....

Miata Parts, Intakes, Superchargers, Headers, Exhausts, Shocks, Springs, Sway Bars, Brake Kits, Autocross and track mods.
blackone
Posts: 15
Joined: Sat Mar 08, 2008 6:36 pm
Location: South Florida
Contact:

Re: Pst.......Something NEW...First Look!

Post by blackone »

Brian, can this be modified to fit a Turbo such as.. you know? with V bands??
Brian
Site Admin
Posts: 11308
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Re: Pst.......Something NEW...First Look!

Post by Brian »

Nope. See our thread on NCExtreme for what a turbo manifold looks like.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
morrisg
Posts: 128
Joined: Mon Nov 15, 2010 12:02 am

Re: Pst.......Something NEW...First Look!

Post by morrisg »

Will PPE supply O2 sensor extensions for their header / midpipe combo? If not, will Goodwin Racing supply the necessary O2 sensor extensions?

It would be a shame to have header / midpipe combos show up with no wiring extensions available.

Also, a question: is it necessary to install a new exhaust header gasket when putting in one of these new headers? I'll go check the installation instructions again just in case I missed it the first time.

Thanks Brian!
Brian
Site Admin
Posts: 11308
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Re: Pst.......Something NEW...First Look!

Post by Brian »

Yes, we will offer wire extensions....
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
rpmchris
Posts: 245
Joined: Thu Jan 18, 2007 4:55 am
Location: Murphy, Texas (NE Dallas)

Re: Pst.......Something NEW...First Look!

Post by rpmchris »

Count me in on one of these, though it won't likely be one of the first...I still have to get my brakes done! 8)
'06 MX-5 Sport 6-speed
Autocross junkie!
Brian
Site Admin
Posts: 11308
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Re: Pst.......Something NEW...First Look!

Post by Brian »

PPE Collector construction.....photo courtesy of AZ Sun Lover!
Attachments
PPE Collector MX5 Long Tube Header.jpg
PPE Collector MX5 Long Tube Header.jpg (96.52 KiB) Viewed 9908 times
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
TOPSECRET
Posts: 8
Joined: Fri Mar 09, 2012 10:47 am

Re: Pst.......Something NEW...First Look!

Post by TOPSECRET »

Looks great. I almost wish I'd waited to buy my gwr header. I guess I'll wait to see the dyno comparo's before I get jealous lol.
Brian
Site Admin
Posts: 11308
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Re: Pst.......Something NEW...First Look!

Post by Brian »

The short PPE midpipe included with the header.
Attachments
PPE Half Midpipe.jpg
PPE Half Midpipe.jpg (50.21 KiB) Viewed 9781 times
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
jboemler
Posts: 304
Joined: Fri Oct 10, 2008 6:15 pm
Location: Mukilteo WA

Re: Pst.......Something NEW...First Look!

Post by jboemler »

What's the pipe diameter of the mid-pipe?
morrisg
Posts: 128
Joined: Mon Nov 15, 2010 12:02 am

Re: Pst.......Something NEW...First Look!

Post by morrisg »

Very interesting. Looks like there is another hanger added at the end with a bracket to attach to the body. What are the rectangles with what looks like two studs each before and after the resonator? More mounts? And this looks like stainless pipe, too.

Edit: mine showed up yesterday. Yes, there is an added hangar for the end of the midpipe to support it without a muffler. The rectangles are special stainless steel clamps to hold the 14 inch Magnaflow resonator to the entry and exit pipes. The resonator is straight through, as in look in one end and see completely through the pipe, no obstructions. The section within the larger can is perforated to allow sound damping. The midpipe is stainless and it is 2.5" OD pipe.

I won't be able to start installation for at least a week, but will try to document with pics anything peculiar to this particular header.
Post Reply