hello, i am in the middle [literally!!] of swapping out my OEM brake pads for hawk hps.
the fronts went on without issue, but the rear pads just wont fit. even with pushing the piston back in the caliper there is still about 2-3mm of brake pad that overlaps the rotor.
so... i got no rear brakes at the moment.
any help advice? anyone with an NC2 running these pads?
car is a 2011 mx5 sport base model...
PLEASE HELP! id like to be able to drive my car tonight!
hawk hps dont fit!?!
-
- Posts: 48
- Joined: Mon May 14, 2012 11:42 am
hawk hps dont fit!?!
Last edited by JeremyJ069 on Sat Aug 18, 2012 11:12 pm, edited 1 time in total.
Re: hawk hps dont fit!?!
Pushing the pistons back won't get the job done....because you have a parking brake.
You need the correct tool to wind out the rear assembly fully before you can get the pads installed.
You need the correct tool to wind out the rear assembly fully before you can get the pads installed.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
-
- Posts: 48
- Joined: Mon May 14, 2012 11:42 am
Re: hawk hps dont fit!?!
even with the caliper completely disconnected from the car?
what tool works to wind out the brake?
what tool works to wind out the brake?
-
- Posts: 48
- Joined: Mon May 14, 2012 11:42 am
Re: hawk hps dont fit!?!
something like this?
http://www.amazon.com/OEM-27111-Disc-Br ... d_add_1_dp
"Also rotates pistons back into the caliper on vehicles with self-adjusting parking brakes"
http://www.amazon.com/OEM-27111-Disc-Br ... d_add_1_dp
"Also rotates pistons back into the caliper on vehicles with self-adjusting parking brakes"
Re: hawk hps dont fit!?!
Yep, though I use this style, which usually costs just a few dollars and plugs onto the end of your socket extension, a nice addition to the socket set you already own.
- Attachments
-
- disc brake tool.jpg (5.89 KiB) Viewed 3332 times
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
-
- Posts: 48
- Joined: Mon May 14, 2012 11:42 am
Re: hawk hps dont fit!?!
awesome. sorry, the last brake job i did was on a car equipped with drum brakes as parking...
ill try to find either of these tools and take another stab at it today.
thanks.
ill try to find either of these tools and take another stab at it today.
thanks.