NC Oil Cooler Kit

Miata Parts, Intakes, Superchargers, Headers, Exhausts, Shocks, Springs, Sway Bars, Brake Kits, Autocross and track mods.

NC Oil Cooler Kit

Postby timw » Mon Jul 01, 2013 6:17 pm

Does the NC oil cooler kit (http://www.good-win-racing.com/Mazda-Pe ... -0260.html) have any provision for an oil pressure tap or can it be made to have a port for a line to a oil pressure sensor? Any other advice where to fit a real oil pressure sensor (and temp, for that matter) on an NC to interface to a DA system?

TIA.

Tim
timw
 
Posts: 17
Joined: Sun May 26, 2013 10:51 am

Re: NC Oil Cooler Kit

Postby Brian » Mon Jul 01, 2013 7:52 pm

Since that is a stock Mazda factory item it does not have any provision for sensors, etc.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Brian
Site Admin
 
Posts: 7798
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA

Re: NC Oil Cooler Kit

Postby timw » Mon Jul 01, 2013 8:44 pm

Is anyone making a ally block with ports to replace the OEM block? Would prefer not to sandwich the sandwich cooler. Are there any other available solutions?
timw
 
Posts: 17
Joined: Sun May 26, 2013 10:51 am

Re: NC Oil Cooler Kit

Postby v67gsr » Mon Jul 08, 2013 8:29 am

That's what I have.
Attachments
IMG_20130706_155239.jpg
IMG_20130706_155239.jpg (155.84 KiB)
v67gsr
 
Posts: 285
Joined: Mon Jul 24, 2006 11:53 pm

Re: NC Oil Cooler Kit

Postby JeremyJ069 » Wed Sep 04, 2013 7:35 am

v67gsr wrote:That's what I have.


that is awesome. not only does it add space for an oil cooler, and ports for gauges, but it also relocates the filter so oil does not spew onto the cross member below it.

love it.
JeremyJ069
 
Posts: 48
Joined: Mon May 14, 2012 11:42 am

Re: NC Oil Cooler Kit

Postby vetracr » Thu Sep 19, 2013 11:19 am

You can replace the oil pressure switch with a vdo switch and pressure sender combined larry
vetracr
 
Posts: 12
Joined: Tue Jul 13, 2010 1:09 pm

Re: NC Oil Cooler Kit

Postby AZ Sun Lover » Sat Sep 21, 2013 3:03 pm

v67gsr wrote:That's what I have.



Ok,
Looks sweet! I'm a bit confused by the photo. I can tell it's out of the car and the trans is to the right. I guess a photo of it installed might help. :oops: I don't care so much about the cooler as I don't race the car but would love to relocate the oil filter and add a real oil pressure gauge. I have to cut up cardboard to make a funnel each time I change the oil on my or my wife's car.

Parts info / supply would be nice to know. Is the filter mount for a ford? (my guess)

Thanks,
AZ
AZ Sun Lover
 
Posts: 167
Joined: Thu Apr 10, 2008 9:29 pm

Re: NC Oil Cooler Kit

Postby Dubcity » Sun Dec 08, 2013 4:27 am

For you guys that installed the OEM NC oil cooler kit,is there a noticeable drop in oil temperature?
Dubcity
 
Posts: 120
Joined: Sun Nov 13, 2011 8:46 pm


Return to Mazda Miata and Fiat 124

Who is online

Users browsing this forum: Bing [Bot] and 6 guests