Page 1 of 1

ND Spring Instalation

Posted: Fri Jul 01, 2016 6:39 pm
by JamesH423
Hello

This is my first time changing the springs on struts (2016 MX-5 Bilsting&Progressive). Are there any do or don'ts disassembling and reinstalling them besides torquing on the ground and again after 500 miles. I plan to compress the springs, loosen the nuts/bolts, change the springs, tighten, and do torque process. If there are any techniques I should be aware of I would appreciate your advice.

Thank you

Re: ND Spring Instalation

Posted: Sat Jul 02, 2016 6:05 am
by Brian
It is pretty easy, only real issue to avoid is stuck bushings, see our ND progress spring product description for the factory service manual page on that.