PROJECT FIAT 124, Testing, Measurements, Dyno, etc
Re: PROJECT FIAT 124, Testing, Measurements, Dyno, etc
Front Brakes Installed...YUMMY
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: PROJECT FIAT 124, Testing, Measurements, Dyno, etc
For those who want to geek out on all the little differences between Fiat and ND. Turbo on the Fiat means they went with high temp silicon exhaust hanger for the midpipe, and the smallest NACA duct I think I have seen to push air past the downpipe below the turbo. Notice drive half shaft rubber dampers, which are not on the ND GT we have.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: PROJECT FIAT 124, Testing, Measurements, Dyno, etc
More..
Perhaps the most ugly stock exhaust ever...
After saving 52 pounds higher up in the Fiat we put just a couple back on with our complete braces, replaces the flimsy factory brace for much more effectiveness. Did this because I noticed a lot of cowl shake, our braces help tame the flex, makes this great little Roadster feel like it is SOLID!
Perhaps the most ugly stock exhaust ever...
After saving 52 pounds higher up in the Fiat we put just a couple back on with our complete braces, replaces the flimsy factory brace for much more effectiveness. Did this because I noticed a lot of cowl shake, our braces help tame the flex, makes this great little Roadster feel like it is SOLID!
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: PROJECT FIAT 124, Testing, Measurements, Dyno, etc
Complete Fiat Stock Battery and bucket and hardware removed from car for install of our light battery kit.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: PROJECT FIAT 124, Testing, Measurements, Dyno, etc
Stock ABARTH exhaust from the Press Driving Day we attended.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
-
- Posts: 497
- Joined: Fri Oct 17, 2014 11:37 pm
Re: PROJECT FIAT 124, Testing, Measurements, Dyno, etc
Reduced resolution version for site use..
Re: PROJECT FIAT 124, Testing, Measurements, Dyno, etc
Our Fiat on 16x8 Enkei RPF1 with 205/50 tires.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: PROJECT FIAT 124, Testing, Measurements, Dyno, etc
Fun side by side...
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: PROJECT FIAT 124, Testing, Measurements, Dyno, etc
The new Fiat124 is a fun return to my roots, composite picture of me nearly 3 decades ago with original Fiat124 and with the latest Fiat124.
- Attachments
-
- FiatHistoryBRianFinal.jpg (171.67 KiB) Viewed 13168 times
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: PROJECT FIAT 124, Testing, Measurements, Dyno, etc
Some more of our top ND Miata wheel fitments on the Fiat for comparison...VOTE your Favorite!
HyperGram 17x9 Race Bronze with 245/40 More Enkei RPF1 16x8 with 205/50 Tungsten 6UL 17x8 with 235/40
HyperGram 17x9 Race Bronze with 245/40 More Enkei RPF1 16x8 with 205/50 Tungsten 6UL 17x8 with 235/40
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com