Page 1 of 1

NA Performance street allignment

Posted: Sun Jul 10, 2016 6:53 pm
by NC MX-5
Hello all, looking for performance street alignment settings on my recently purchased 1995 Miata. Only performance items on car is 15x8's with 205/50/15 RE71r's, and a roll bar. Car will ride at stock ride height, until money to pay for coilovers in the future, when it will be re-aligned. Car had inside wear on original front tires and looking to preserve my 200tw on my new tires as much as possible, while still benefiting from the street performance specs. Thx.

Re: NA Performance street allignment

Posted: Mon Jul 11, 2016 2:36 pm
by Brian
Inside wear at stock height is odd, my guess is lots of toe out currently. So, check toe. Those tires live such a short life, nothing is really going to 'preserve' their life but here is a relatively conservative mix of settings.

Front
Camber -1.2
Toe Zero
Caster 6.5

Rear
Camber -1.2
Toe IN 1/32 per side

Re: NA Performance street allignment

Posted: Mon Jul 11, 2016 6:51 pm
by NC MX-5
Thank you very much.