Brake fluid flush (questions)

Miata Parts, Intakes, Superchargers, Headers, Exhausts, Shocks, Springs, Sway Bars, Brake Kits, Autocross and track mods.

Brake fluid flush (questions)

Postby YomnyM235 » Fri Jul 29, 2016 9:07 am

Getting my Hawk pads soon and i'll need to flush fluids. Whats the recommended order if any to bleed calipers?
The clutch fluid since its the same reservoir, should i leave it as is or proceed to bleed slave as well? I'll be using a motive bleeder.

I'm hoping i just pump with the motive and bleed away calipers, is this the same process for the slave cylinder? No special process or parts to remove or hold, clutch pedal pumping?

I say this because on some BMW's its really hard to bleed the clutch, pedal goes down and the cylinder is best remove, bleed outside, then installed.
YomnyM235
 
Posts: 2
Joined: Fri Jul 29, 2016 8:50 am

Re: Brake fluid flush (questions)

Postby Brian » Fri Jul 29, 2016 11:28 am

Nothing special here, but see the threads at Miata.net (including garage section) where many have posted pics and very detailed instructions.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Brian
Site Admin
 
Posts: 7874
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA

Re: Brake fluid flush (questions)

Postby YomnyM235 » Fri Jul 29, 2016 2:07 pm

Thanks

I've done quite a bit of searching but couldn't really find much(except in garage section). Not sure if location of the ND's ABS unit is the same or anything else is the same for that matter but i'm almost certain it can't be that much different.

Thanks for the suggestions.
YomnyM235
 
Posts: 2
Joined: Fri Jul 29, 2016 8:50 am


Return to Mazda Miata and Fiat 124

Who is online

Users browsing this forum: No registered users and 7 guests