Page 1 of 1

NC Stock Size 2-Piece Rotors

Posted: Thu Aug 04, 2016 2:03 pm
by Ryan @ GWR
Lots of requests for these, and I'm happy to finally be able to pull the cover off this project! Previously the only option for a 2 piece rotor in the factory rotor dimensions was from PFC at a whopping $900+ for the pair :eek:

So here we go with over $400 of savings and even lower weight to boot:

Goodwin Racing Superlight 2-Piece FRONT Rotors
NC_2pcRotor_Front_Slotted2.jpg
We worked hand in hand with V8R to design a new hat specifically for this application. The hats are super strong, light, hubcentric, and designed with locking fasteners so there's no hassle with safety wiring the bolts like some 2 piece rotors.

We have two flavors available for the rotors: the Superlight which comes in at close to 9 lbs fully assembled for 4.25 lbs saved per side compared to a factory rotor, or the Race version with beefed up wall thickness and directional curved vanes to give exceptional lifespan and heat tolerance in the toughest conditions. The race saves 3 lbs per side.

Naturally, the Superlight will be the go-to choice for street guys and autocrossers. Both rotors are STR autocross legal.

Just opened it up for prepays now. Hope to be shipping the first batch by September!
NC_2pcRotor_Plain 3.jpg
NC_2pcRotor_Plain 3.jpg (79.91 KiB) Viewed 8857 times
NC_2pcRotor_Race 1.jpg

Re: NC Stock Size 2-Piece Rotors

Posted: Sat Aug 06, 2016 11:35 am
by JamesK383
This is really exciting.

I have been ready to buy something like this for a very long time.

Couple questions:

1) how much are replacement rotors
2) do these require any Safety PM? like checking the tightness of the fasteners between the center hat and rotor
3) Is there a rear rotor application also in development?

Re: NC Stock Size 2-Piece Rotors

Posted: Sat Aug 13, 2016 11:34 am
by Zaphod
This makes me wish I needed brakes! These look awesome.

Re: NC Stock Size 2-Piece Rotors

Posted: Sat Aug 13, 2016 8:52 pm
by Ryan @ GWR
JamesK383 wrote:This is really exciting.

I have been ready to buy something like this for a very long time.

Couple questions:

1) how much are replacement rotors
2) do these require any Safety PM? like checking the tightness of the fasteners between the center hat and rotor
3) Is there a rear rotor application also in development?
Woops, sorry I missed this!

1) Replacements are ~$85 for the superlights, just a bit more for the race.
2) No need, locking hardware used so they won't loosen.
3) Rears almost ready, will post those in just a couple days :)

Re: NC Stock Size 2-Piece Rotors

Posted: Mon Aug 15, 2016 8:23 pm
by JamesK383
any chance you guys will offer this in a 4 wheel kit with pads?

Re: NC Stock Size 2-Piece Rotors

Posted: Mon Aug 15, 2016 11:24 pm
by Ryan @ GWR
We can put such a kit together for you, just give us a ring during business hours.

Re: NC Stock Size 2-Piece Rotors

Posted: Tue Aug 16, 2016 8:51 am
by LStillman
Are there any plans to do a caliper upgrade kit along with these rotors front and rear?

Re: NC Stock Size 2-Piece Rotors

Posted: Tue Aug 16, 2016 1:50 pm
by Ryan @ GWR
Probably not. Such caliper kits already exist from some other vendors, so not much point in us doing it. These rotors will pair nicely with those caliper kits for an ultra lightweight combo.

Re: NC Stock Size 2-Piece Rotors

Posted: Mon Sep 19, 2016 5:29 pm
by tamvette
These are still listed as Prepay. How long of a wait would I be looking at if I ordered now?

Re: NC Stock Size 2-Piece Rotors

Posted: Wed Oct 26, 2016 1:27 pm
by Ryan @ GWR
Production on the hats for these super lightweight rotors took longer than expected but the hats are finally in stock!!
NC_2pcRotors_Rear.jpg
Keep in mind, the friction rings are made to order based on your request for slotted or plain face, so there is always a 2-week turn around time on orders for these.