Page 1 of 1

Difference between endlinks

Posted: Sun Nov 06, 2016 2:03 pm
by Tonioo
Hello,

I run a 2012 NC on track with Ohlins R&T + RB sway bars, and need to put shorters endlinks.

What is the difference between the RB endlinks and the GWR ones ? When looking at the pictures it seems to be the same material (GWR are just shorter according to the description). My car is lowered about 1.5 inch.

Thank you for your answer.

Regards

Re: Difference between endlinks

Posted: Mon Nov 07, 2016 12:50 am
by Ryan @ GWR
Endlinks are fairly simple things, for the most part they're very similar. The key difference is that the GWR units include multiple center stud lengths to give you more length adjustment than any other. The RB endlinks have less than 0.5" of adjustment range; not enough for every ride height and in some cases you need to use the rear endlinks for the front because they can go shorter... With the GWR endlinks you don't have to worry about this - you get a full 1.5" of length range with the included studs.

Re: Difference between endlinks

Posted: Mon Nov 07, 2016 1:12 am
by Tonioo
Hi Brian, thank you for this detailed answer. I will go for the GWR ones, and try to find a way to bring it to France...