Blackbird Fabworx NC GT3 Questions

Miata Parts, Intakes, Superchargers, Headers, Exhausts, Shocks, Springs, Sway Bars, Brake Kits, Autocross and track mods.

Blackbird Fabworx NC GT3 Questions

Postby DanielS172 » Fri Oct 27, 2017 11:13 am

Hey Brian,

I had a few questions about the GT3 rollbar for the NC.

1. Would I be able to pick this up from your facility to avoid shipping charges?

2. If so, could I get the dimensions of the rollbar? Trying to find out if this would fit in my Golf GTI.

Thanks!
2006 MX-5, marble white with black OEM hardtop: Flyin' Miata Stage 2 suspension, Flyin' Miata exhaust, GWR Helmholtz mid-pipe, Hard Dog M3 roll bar, Hawk HP+ pads, stainless steel lines, GWR/Moroso aluminum coolant overflow tank, Voodoo shift knob.
DanielS172
 
Posts: 24
Joined: Mon Jul 25, 2016 7:09 pm

Re: Blackbird Fabworx NC GT3 Questions

Postby Brian » Sat Oct 28, 2017 6:27 am

Ships factory to you, not in our San Diego location for pickup.

We could arrange pickup for you at Blackbird...in Northridge
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Brian
Site Admin
 
Posts: 7851
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA

Re: Blackbird Fabworx NC GT3 Questions

Postby DanielS172 » Sat Oct 28, 2017 9:38 am

I see, that makes sense. Do you foresee any issues with installing this bar after previously installing a Hard Dog M3 (non sport, no rearward braces)? I'm just concerned that some of the cutouts/holes drilled for the Hard Dogv may cause problems when installing the GT3 bar.
2006 MX-5, marble white with black OEM hardtop: Flyin' Miata Stage 2 suspension, Flyin' Miata exhaust, GWR Helmholtz mid-pipe, Hard Dog M3 roll bar, Hawk HP+ pads, stainless steel lines, GWR/Moroso aluminum coolant overflow tank, Voodoo shift knob.
DanielS172
 
Posts: 24
Joined: Mon Jul 25, 2016 7:09 pm

Re: Blackbird Fabworx NC GT3 Questions

Postby Brian » Sat Oct 28, 2017 9:41 am

Indeed I expect plastic cuts for your last bar will not line up with new bar, but result worth it.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Brian
Site Admin
 
Posts: 7851
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA

Re: Blackbird Fabworx NC GT3 Questions

Postby Zadnak » Sun Oct 29, 2017 7:43 pm

Any of the NC rollbars will fit, with ease, in the back of a Golf with the back seat down.

If you're making the car a track car, ditch the plastics behind the seats all together. I did a few years ago and it's been great so far.
Zadnak
 
Posts: 7
Joined: Tue Aug 18, 2015 4:28 pm

Re: Blackbird Fabworx NC GT3 Questions

Postby DanielS172 » Sun Oct 29, 2017 11:30 pm

Zadnak,

Thanks for your input. My plan is indeed to turn it into a track car anyway, so I will be removing all of the plastic trim pieces behind the seats and possibly just laying down some black fabric to cover up the exposed chassis and wiring, etc. I've seen this done before and I think it looks great. 8)
2006 MX-5, marble white with black OEM hardtop: Flyin' Miata Stage 2 suspension, Flyin' Miata exhaust, GWR Helmholtz mid-pipe, Hard Dog M3 roll bar, Hawk HP+ pads, stainless steel lines, GWR/Moroso aluminum coolant overflow tank, Voodoo shift knob.
DanielS172
 
Posts: 24
Joined: Mon Jul 25, 2016 7:09 pm


Return to Mazda Miata and Fiat 124

Who is online

Users browsing this forum: No registered users and 8 guests