Hey Brian,
I had a few questions about the GT3 rollbar for the NC.
1. Would I be able to pick this up from your facility to avoid shipping charges?
2. If so, could I get the dimensions of the rollbar? Trying to find out if this would fit in my Golf GTI.
Thanks!
Blackbird Fabworx NC GT3 Questions
-
- Posts: 58
- Joined: Mon Jul 25, 2016 7:09 pm
Blackbird Fabworx NC GT3 Questions
2014 Club | OEM hardtop | GWR HH mid, FM muffler | ZetaCRD | Wilwood LBBK | Blackbird Fabworx GT3 roll bar | TRMotorsports FF10s
Re: Blackbird Fabworx NC GT3 Questions
Ships factory to you, not in our San Diego location for pickup.
We could arrange pickup for you at Blackbird...in Northridge
We could arrange pickup for you at Blackbird...in Northridge
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
-
- Posts: 58
- Joined: Mon Jul 25, 2016 7:09 pm
Re: Blackbird Fabworx NC GT3 Questions
I see, that makes sense. Do you foresee any issues with installing this bar after previously installing a Hard Dog M3 (non sport, no rearward braces)? I'm just concerned that some of the cutouts/holes drilled for the Hard Dogv may cause problems when installing the GT3 bar.
2014 Club | OEM hardtop | GWR HH mid, FM muffler | ZetaCRD | Wilwood LBBK | Blackbird Fabworx GT3 roll bar | TRMotorsports FF10s
Re: Blackbird Fabworx NC GT3 Questions
Indeed I expect plastic cuts for your last bar will not line up with new bar, but result worth it.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: Blackbird Fabworx NC GT3 Questions
Any of the NC rollbars will fit, with ease, in the back of a Golf with the back seat down.
If you're making the car a track car, ditch the plastics behind the seats all together. I did a few years ago and it's been great so far.
If you're making the car a track car, ditch the plastics behind the seats all together. I did a few years ago and it's been great so far.
-
- Posts: 58
- Joined: Mon Jul 25, 2016 7:09 pm
Re: Blackbird Fabworx NC GT3 Questions
Zadnak,
Thanks for your input. My plan is indeed to turn it into a track car anyway, so I will be removing all of the plastic trim pieces behind the seats and possibly just laying down some black fabric to cover up the exposed chassis and wiring, etc. I've seen this done before and I think it looks great.
Thanks for your input. My plan is indeed to turn it into a track car anyway, so I will be removing all of the plastic trim pieces behind the seats and possibly just laying down some black fabric to cover up the exposed chassis and wiring, etc. I've seen this done before and I think it looks great.
2014 Club | OEM hardtop | GWR HH mid, FM muffler | ZetaCRD | Wilwood LBBK | Blackbird Fabworx GT3 roll bar | TRMotorsports FF10s