Page 1 of 1

Our MX5 Flares....

Posted: Sun May 04, 2014 9:00 pm
by Brian
Great pics of our MX5 Flares, original style, courtesy of customer Chris Robbins.

This is his street setup, 17x10 38ET with 255/40.

Re: Our MX5 Flares....

Posted: Tue May 06, 2014 2:00 pm
by roadster_nh
Looks great Chris, although somewhat naked without the decals!

Re: Our MX5 Flares....

Posted: Sun May 11, 2014 6:32 pm
by rpmchris
roadster_nh wrote:Looks great Chris, although somewhat naked without the decals!
Gimme a couple of weeks...the fresh paint has to cure! 8)

I also had the front emblem relief and the antenna hole filled and smoothed.

Re: Our MX5 Flares....

Posted: Mon May 19, 2014 12:40 pm
by jtw1974
The flares look great. Do they have to be riveted? I read they come with 2 sided tape for installation but will that be strong enough for daily driving?

Re: Our MX5 Flares....

Posted: Tue May 20, 2014 10:54 am
by rpmchris
I think they're probably strong enough for daily usage...I autocross mine and don't want them coming loose with a cone strike, especially since I cut them at the nose so I can take it off easily.

Re: Our MX5 Flares....

Posted: Fri Mar 13, 2015 7:30 pm
by bluemeany
Chris, I see what your street wheel and tire set up is, wondering what you use for Autox?

Also, anyone have any pics of what needs to be cut and welded in the rear?


Adam

Re: Our MX5 Flares....

Posted: Sat Mar 14, 2015 5:16 am
by Brian
Hi Adam

Click into our original thread on our original flares at THIS LINK for lots of pics of the work and welding involved.