New Product Today!
Singular Motorsports 2.5" and 3" brake ducts are designed to fit all 1990-2005 Miatas with wheel sizes 14" and up.
Note: There are some limitation to the hose size which you can run to the ducts:
2.5" hose is compatible with the factory under trays, requiring little to no modifications . We recommend the 2.5" brake ducts for those who want the most cooling ability with the least amount of modification. 2.5" hose can clear 15x9" wheels with the factory undertray intact and without the use of any spacers.
In most cases, 3" hose requires a non-factory or fabricated under tray to clear 9" wheels or larger. With the factory plastic undertray removed, 3" hose will clear 15x9 and 15x10 with a 5mm spacer.
We recommend users run the largest size brake ducts that they are able to accommodate on their car. Brake pad and rotor life is increased further with the larger diameter units, as well as a larger reduction in operating temperatures.
Key features of our brake ducts include:
Precision Waterjet and TIG Welded
Lightweight Aluminum Construction
Reduced Brake Temperature
Increased Rotor and Pad Life
Improved Brake Consistency
Made In The USA
New Singular MotorSports Brake Ducts
New Singular MotorSports Brake Ducts
- Attachments
-
- Singularbrakeducts2.jpg (124.22 KiB) Viewed 10307 times
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: New Singular MotorSports Brake Ducts
2.5 Size Installed Pics
- Attachments
-
- Singular-2.5inch installed.jpg (385.81 KiB) Viewed 10307 times
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: New Singular MotorSports Brake Ducts
3 Inch Size Installed!
- Attachments
-
- S-3inch BD2-1.jpg (240.04 KiB) Viewed 10307 times
-
- S-3inch-installed.jpg (184.75 KiB) Viewed 10307 times
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: New Singular MotorSports Brake Ducts
New additions from Singular Motorsports - now there is a 3" brake duct option for 1990-2005 Miatas using the Keisler Automation spindle/hub!
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
-
- Posts: 497
- Joined: Fri Oct 17, 2014 11:37 pm
Re: New Singular MotorSports Brake Ducts
ABS with the big 3" brake ducts is a tight squeeze with the ABS sensor's wiring. Customer Russell Garner figured out that if you unbolt the sensors and swap the left sensor to the right side of the car and vice versa, they clear with room to spare:
Sensor in its standard position with the 3" duct, wiring gets squeezed:
Left and Right sensors swapped:
Sensor in its standard position with the 3" duct, wiring gets squeezed:
Left and Right sensors swapped: