We got one NC application unit to test fit....and we were blown away at the precision of the welds and fit, quality of the brackets and fin work, nicely done units! Some of their spec info below.
"B-Tube" technology - Unlike a regular oval shape "O" type radiator
tube, CSF uses a specially engineered tube in a shape of a "B".
These "B-tubes" are carefully formed and then brazed over the
seam to seal. CSF is able to use thinner and lighter aluminum
material (better cooling efficiency) because this design is actually
stronger than normal "O" shape tubes that are welded.
The design (inlet in the middle of tube that is seam brazed)
increases the heat transfer surface area of the tube by
approximately 15% over regular tubes. You get the efficiency of
2 smaller tubes vs. 1 large tube within the same space criteria.
With "B-tubes" you are able to get "dual liquid laminar flow."
The tubes are made from aircraft grade special clad aluminum
and are intricately formed on our high precision 6-stage tube-
forming mill. No other aftermarket radiator manufacturer uses
this technology. This technology raises the bar and sets the
standard for high performance radiator cores.
New CSF Miata Radiators
New CSF Miata Radiators
- Attachments
-
- CSF-NC.JPG (68.17 KiB) Viewed 10676 times
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: New CSF Miata Radiators
Pics of NA/NB application
- Attachments
-
- CSF6.jpeg (59.41 KiB) Viewed 10672 times
-
- CSF5.jpeg (66.63 KiB) Viewed 10672 times
-
- CSF4.jpeg (82.15 KiB) Viewed 10672 times
-
- CSF3.jpeg (78.33 KiB) Viewed 10672 times
-
- CSF1.jpeg (62.44 KiB) Viewed 10672 times
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: New CSF Miata Radiators
Hi Brian,
I overheated my engine this week-end during a trackday (NC Turbo), so it is time for me to install an enhanced radiator.
For my application, should I use a CSF or a Koyo radiator? Which one cools better ?
Thanks,
David.
I overheated my engine this week-end during a trackday (NC Turbo), so it is time for me to install an enhanced radiator.
For my application, should I use a CSF or a Koyo radiator? Which one cools better ?
Thanks,
David.
Re: New CSF Miata Radiators
Hi David
Both would serve you well, I have been a KOYO fan for many years....but I now think this CSF is even a bit better.
Both would serve you well, I have been a KOYO fan for many years....but I now think this CSF is even a bit better.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: New CSF Miata Radiators
Thanks Brian.
I hope my engine is still ok, because some coolant went to cylinders (exhaust was cleaned). After the overheating, I drove 200 miles on highway, my coolant level didn't change and my exhaust has black dust again.
I hope my engine is still ok, because some coolant went to cylinders (exhaust was cleaned). After the overheating, I drove 200 miles on highway, my coolant level didn't change and my exhaust has black dust again.
Re: New CSF Miata Radiators
New Delivery of CSF Radiators Just In Time to BEAT Summer Heat!
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com