Page 1 of 1

Performance Friction Floating Rotors for your NC

Posted: Tue Mar 17, 2015 4:32 pm
by Ryan @ GWR
Another new addition to our shop here, these are the same rotors used by MX-5s racing in the IMSA Continental Tire Sports Car Challenge.
PFC2pcRotors.jpg
PFC2pcRotors.jpg (141.41 KiB) Viewed 8407 times
These come as a pair of rotors and hats, fully assembled with all hardware, ready to bolt on.

These motorsports-grade, 2-piece floating rotors are direct replacements for the standard 2006-2015 MX-5 rotors, and work with the OE calipers.

2-piece floating rotors are dramatically superior to cheaper one-piece rotors for performance/track use. As the rotor temperature increases, a one-piece rotor will warp and migrate laterally - sometimes as much as a quarter inch one way or the other. 2-piece floating rotors stay centered even under extreme conditions, reducing brake drag and keeping the brakes operating properly and at lower temperature.

PFC Championship-winning race rotors feature benefits such as:
*Lightest Design
*Longest-Lasting
*More Stopping Power
*Most Consistent
*Best Cooling
*Reduced Distortion
*FEA Designed Thermal Capacity
*High Carbon Alloy with Molybdenum and Copper
*Extensive FEA Analysis

Performance Friction rotors are "dimpled" rather than slotted. Note that they are NOT cross-drilled:
Flyout_Aftermarket_Rotor.jpg
Flyout_Aftermarket_Rotor.jpg (117.2 KiB) Viewed 8407 times
FreedomAutosportMX5.jpg
FreedomAutosportMX5.jpg (226.23 KiB) Viewed 8407 times
AlaraMX5 Wheel Well.jpg
AlaraMX5 Wheel Well.jpg (279.55 KiB) Viewed 8407 times
CJWilson MX5.jpg
CJWilson MX5.jpg (330.8 KiB) Viewed 8407 times

Re: Performance Friction Floating Rotors for your NC

Posted: Tue Mar 17, 2015 4:33 pm
by Ryan @ GWR
FreedomAutosport Wheel Well.jpg
FreedomAutosport Wheel Well.jpg (447.62 KiB) Viewed 8405 times

Re: Performance Friction Floating Rotors for your NC

Posted: Tue Mar 17, 2015 7:30 pm
by matthew-m
Do these offer a weight savings versus standard one-piece rotors?

Re: Performance Friction Floating Rotors for your NC

Posted: Wed Mar 18, 2015 7:43 am
by Freescopesdad
Sorry Ryan, but I don't see these in your store.

Re: Performance Friction Floating Rotors for your NC

Posted: Wed Mar 18, 2015 10:42 am
by Ryan @ GWR
Just added to the store so they took a little while to show up. Here's a direct link:

http://www.good-win-racing.com/Mazda-Pe ... -1604.html

Re: Performance Friction Floating Rotors for your NC

Posted: Wed Mar 18, 2015 2:51 pm
by Ryan @ GWR
matthew-m wrote:Do these offer a weight savings versus standard one-piece rotors?
About 1.5 lb saved per corner.