Header Installation

Installations instructions for MonsterFlow intakes, Big Brake Kits, shocks and more.

Re: Header Installation

Postby DavidM046 » Tue Mar 27, 2018 7:44 pm

Brian wrote:That first pic really tells me midpipe is too long, making it shorter will pull that front end up above that plate. The only other explanation we sometimes see is deflated/crumbling/worn out motor mounts dropping entire motor too low.

Roger that. I'll give the midpipe adjustment a try. As a side I also installed your Roadster Sport Competition Motor mounts but I'm guessing they're not going to be the issue.

Hopefully I'll get to it tomorrow, if not, then next week.

Thanks again. I'll post the results.
DavidM046
 
Posts: 3
Joined: Mon Apr 17, 2017 6:00 am

Re: Header Installation

Postby ChristopherH060 » Wed Mar 28, 2018 7:04 am

Brian,
Quick follow-up question. The ND standard header came with a new flat metal gasket. Do I need to add the factory donut gasket too or just the flat one?
Thanks
ChristopherH060
 
Posts: 7
Joined: Sun Mar 11, 2018 1:35 pm

Re: Header Installation

Postby Brian » Wed Mar 28, 2018 7:07 am

One or the other...but not both.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Brian
Site Admin
 
Posts: 8051
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA

Previous

Return to Installation Instructions

Who is online

Users browsing this forum: No registered users and 1 guest