No. It's in their "street" line. It's very much like their Evo but with additional scuff resistance on the sides and a bottom mount (vs. side mount).
Come to think of it, the Evo doesn't have a crotch passthru either...
Replacing Miata NA/NB/NC Seats with Sparco
Re: Replacing NC seats with Sparco
'06 MX-5 Sport 6-speed
Autocross junkie!
Autocross junkie!
Re: Replacing NC seats with Sparco
Dang! Thanks for letting me know though. Very nice seats.
-
- Posts: 111
- Joined: Thu Sep 04, 2008 2:03 pm
- Location: Houston area
Re: Replacing NC seats with Sparco
Evo II does. That the seat in our LeMons Sentra SE-R.rpmchris wrote:Come to think of it, the Evo doesn't have a crotch passthru either...
Re: Replacing NC seats with Sparco
Huh...is the passthrough under the front center bolster?
'06 MX-5 Sport 6-speed
Autocross junkie!
Autocross junkie!
-
- Posts: 111
- Joined: Thu Sep 04, 2008 2:03 pm
- Location: Houston area
Re: Replacing NC seats with Sparco
Lift the thigh padding to find the pass-thru. It's attached with Velcro (tm).
Re: Replacing NC seats with Sparco
Nope. Just checked - it's not on the Fighter.
'06 MX-5 Sport 6-speed
Autocross junkie!
Autocross junkie!
Re: Replacing NC seats with Sparco
Chris,
The photos on your Flickr stream are certainly helpful. Thanks. What type of material and what thickness did you use for your fabricated seatbelt-buckle mount?
Thanks again.
The photos on your Flickr stream are certainly helpful. Thanks. What type of material and what thickness did you use for your fabricated seatbelt-buckle mount?
Thanks again.
2009, STR & DD. 1995, HPDE. 2004 MSM, sold. 2010 Mazda3, hers.
Re: Replacing NC seats with Sparco
The straps were 2" wide, 14 gauge (about 2mm).
'06 MX-5 Sport 6-speed
Autocross junkie!
Autocross junkie!
Re: Replacing NC seats with Sparco
Chris,
Thanks for the information.
I noticed that the seat rails I ordered from Brian came with an extra small, loose plate. I assume, since there is just one, that it is somehow related to mounting the passenger-side seatbelt at the bottom, since, in stock form, that end of the belt attaches to the passenger seat. Is that correct, or is it intended for another purpose? Should I have received two of them?
Thanks again.
Thanks for the information.
I noticed that the seat rails I ordered from Brian came with an extra small, loose plate. I assume, since there is just one, that it is somehow related to mounting the passenger-side seatbelt at the bottom, since, in stock form, that end of the belt attaches to the passenger seat. Is that correct, or is it intended for another purpose? Should I have received two of them?
Thanks again.
2009, STR & DD. 1995, HPDE. 2004 MSM, sold. 2010 Mazda3, hers.
Re: Replacing NC seats with Sparco
Huh...I don't remember getting one of those.
'06 MX-5 Sport 6-speed
Autocross junkie!
Autocross junkie!