Floor Mounted Race Seats in an NC

Installations instructions for MonsterFlow intakes, Big Brake Kits, shocks and more.
Post Reply
JonD250
Posts: 3
Joined: Sun Mar 02, 2014 7:38 pm
Location: Evans, G

Floor Mounted Race Seats in an NC

Post by JonD250 »

Hello all. In order to pass the 'broomstick test', I may have to mount the side supports to the floor of my NC. For reference, my head sits more than 4" over the stock roll bar covers. So, does anybody have any advice for floor mounting seats, or does anyone know of a side mount system that positions the seats lower than the others. I am planning on the Sparco Fighter or the Momo Supercup without sliders.

TIA,
Jon Daudelin
Brian
Site Admin
Posts: 11307
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Re: Floor Mounted Race Seats in an NC

Post by Brian »

Wow...more than 4 inches? I think you are going to need to cut the floor and build box DOWN.

I am 6'2 and use our seat rails to get under the cages in our track NCs...with seat as far back and low as it can be without changing the floor (we did dent bulkhead behind seat to get me further back).
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
JonD250
Posts: 3
Joined: Sun Mar 02, 2014 7:38 pm
Location: Evans, G

Re: Floor Mounted Race Seats in an NC

Post by JonD250 »

Brian,

That's good news. What seat / mount combo do you use?

Thanks,
Jon
Brian
Site Admin
Posts: 11307
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Re: Floor Mounted Race Seats in an NC

Post by Brian »

I have more than one seat....but I really like my Cobra Suzuka Pro.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Post Reply