Heavy Duty Sway Bar Mounts Install

Installations instructions for MonsterFlow intakes, Big Brake Kits, shocks and more.

Heavy Duty Sway Bar Mounts Install

Postby Chameleoki » Tue Jan 20, 2015 11:10 am

I am installing the Heavy Duty Sway Bar Mounts and they was wondering if they are supposed to be perfectly flush with the frame. I have them pushed on enough (had to use a big c-clamp to get them to that point) to screw on the bolts but there is a tiny gap in between the mount and the frame underneath. Just wondering if they are supposed to press right up to the bottom of the frame or not.

Thanks!
Chameleoki
 
Posts: 1
Joined: Tue Jan 20, 2015 7:57 am

Re: Heavy Duty Sway Bar Mounts Install

Postby Brian » Tue Jan 20, 2015 4:43 pm

The uneven sitting/thickness of the powder coating will often lift up a corner or two on those but it will be fine.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Brian
Site Admin
 
Posts: 7870
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA


Return to Installation Instructions

Who is online

Users browsing this forum: No registered users and 1 guest