NC Seat Installation PCI Mounts

Installations instructions for MonsterFlow intakes, Big Brake Kits, shocks and more.

NC Seat Installation PCI Mounts

Postby WalterS349 » Mon Jul 18, 2016 6:32 pm

Just received my new brackets to install and have removed the driver seat so far. There are several connections connected to the stock seat. Any advice on what to do with these on the new seat would be appreciated! I assume they are

Seat Belt - I am installing a 6 point harness so not sure what to do with this one, or can I bypass it somehow?

Seat Warmer - Easy enough on this one...

Side Air Bag - Guessing this is plugged in

??? - Fourth connection?

Is there a way to identify which one is which and how to bypass the idiot lights, etc?

thanks!
Attachments
Driver Side Connection.png
WalterS349
 
Posts: 1
Joined: Sat Oct 17, 2015 5:22 am

Re: NC Seat Installation PCI Mounts

Postby Ryan @ GWR » Mon Jul 18, 2016 7:48 pm

As to the seatbelt, the PCI bracket has two tabs with a single hole in each for your harness lap belts - you can double-up on these two bolts and attach both the harness belts and the stock seatbelt if you want to retain the OEM belt for use sometimes.

We just put a piece of tape over the dummy light on the dash and forgot all about it, out of sight out of mind! But, you can defeat it - it requires a resistor of the correct resistance, don't have the specs on-hand, but I know it's been figured out by a few people and the info should be out there on the web.. somewhere.
Ryan @ GWR
 
Posts: 210
Joined: Fri Oct 17, 2014 11:37 pm


Return to Installation Instructions

Who is online

Users browsing this forum: No registered users and 1 guest