Replacing Miata NA/NB/NC Seats with Sparco
Re: Replacing NC seats with Sparco
Nope. Just checked - it's not on the Fighter.
'06 MX-5 Sport 6-speed
Autocross junkie!
Autocross junkie!
Re: Replacing NC seats with Sparco
Chris,
The photos on your Flickr stream are certainly helpful. Thanks. What type of material and what thickness did you use for your fabricated seatbelt-buckle mount?
Thanks again.
The photos on your Flickr stream are certainly helpful. Thanks. What type of material and what thickness did you use for your fabricated seatbelt-buckle mount?
Thanks again.
2009, STR & DD. 1995, HPDE. 2004 MSM, sold. 2010 Mazda3, hers.
Re: Replacing NC seats with Sparco
The straps were 2" wide, 14 gauge (about 2mm).
'06 MX-5 Sport 6-speed
Autocross junkie!
Autocross junkie!
Re: Replacing NC seats with Sparco
Chris,
Thanks for the information.
I noticed that the seat rails I ordered from Brian came with an extra small, loose plate. I assume, since there is just one, that it is somehow related to mounting the passenger-side seatbelt at the bottom, since, in stock form, that end of the belt attaches to the passenger seat. Is that correct, or is it intended for another purpose? Should I have received two of them?
Thanks again.
Thanks for the information.
I noticed that the seat rails I ordered from Brian came with an extra small, loose plate. I assume, since there is just one, that it is somehow related to mounting the passenger-side seatbelt at the bottom, since, in stock form, that end of the belt attaches to the passenger seat. Is that correct, or is it intended for another purpose? Should I have received two of them?
Thanks again.
2009, STR & DD. 1995, HPDE. 2004 MSM, sold. 2010 Mazda3, hers.
Re: Replacing NC seats with Sparco
Huh...I don't remember getting one of those.
'06 MX-5 Sport 6-speed
Autocross junkie!
Autocross junkie!
Re: Replacing NC seats with Sparco
Sounds like something else got left in the box....the rails....are just the rails as pictured on the website. Perhaps you should email me a pic of this other plate in the box.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: Replacing NC seats with Sparco
Perhaps Mr Goodwin can fill us in.rpmchris wrote:Huh...I don't remember getting one of those.
2009, STR & DD. 1995, HPDE. 2004 MSM, sold. 2010 Mazda3, hers.
Re: Replacing NC seats with Sparco
Hey all,
I have the NC seat brackets from the site here and can't figure out how they're pre-drilled for the Sparco sliders -- I think I'm missing something. I have a Sparco Pro 2000 seat (so it has both the bottom and side mounting options), and when I bolt the sliders directly onto the seat, they don't come close to matching up to the seat bracket.
What is meant by the "pre-drilled for Sparco Sliders" feature-- the bottom hole locations on Sparco seats seems to be the same across the line of bottom-mounting seats, so I know that's not the problem. I also tried using the side mounts (and then attach the sliders to those) to see where the holes would line up, but they also seemed to be off by quite a bit.
What am I doing wrong and I apologize if I'm missing something obvious!
Richard
I have the NC seat brackets from the site here and can't figure out how they're pre-drilled for the Sparco sliders -- I think I'm missing something. I have a Sparco Pro 2000 seat (so it has both the bottom and side mounting options), and when I bolt the sliders directly onto the seat, they don't come close to matching up to the seat bracket.
What is meant by the "pre-drilled for Sparco Sliders" feature-- the bottom hole locations on Sparco seats seems to be the same across the line of bottom-mounting seats, so I know that's not the problem. I also tried using the side mounts (and then attach the sliders to those) to see where the holes would line up, but they also seemed to be off by quite a bit.
What am I doing wrong and I apologize if I'm missing something obvious!
Richard
Re: Replacing NC seats with Sparco
You bolt the sliders to the rail, and your seat to side mounts....
- Attachments
-
- side mounts.jpg (91.28 KiB) Viewed 14471 times
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: Replacing NC seats with Sparco
NA/NB seats on our rails.
Sparco Corsa
Sparco Corsa
- Attachments
-
- Sparco Corsa.JPG (38.92 KiB) Viewed 13897 times
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com