Glass Hardtop & MX5Cup Cage

Miata Parts, Intakes, Superchargers, Headers, Exhausts, Shocks, Springs, Sway Bars, Brake Kits, Autocross and track mods.
Post Reply
Brian
Site Admin
Posts: 11308
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Re: Glass Hardtop & MX5Cup Cage

Post by Brian »

Both are in use on our NCLIGHT track toy. Hardtop does NOT include factory half inch thick rubber seal along the bottom and as a consequence it sits on the bar with gap all the way around the back of about half an inch. You can either find the factory seal or do your own. I added some foam rubber material meant to seal door edges.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
timw
Posts: 17
Joined: Sun May 26, 2013 10:51 am

Re: Glass Hardtop & MX5Cup Cage

Post by timw »

Thanks. Am doing some preliminary planning on a potential project.
timw
Posts: 17
Joined: Sun May 26, 2013 10:51 am

Re: Glass Hardtop & MX5Cup Cage

Post by timw »

Are these AWR Cup cages now unobtanium like the other AWR roll bars?
Brian
Site Admin
Posts: 11308
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Re: Glass Hardtop & MX5Cup Cage

Post by Brian »

We can still get you an AWR cage if you like. Tony is done making the bars but continues to make the full cages.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
AlexD859
Posts: 15
Joined: Thu Dec 26, 2013 1:58 am

Re: Glass Hardtop & MX5Cup Cage

Post by AlexD859 »

Brian,

Does the factory latch from the soft top work with the hard top? I plan on removing the soft top entirely when I purchase a hardtop. Also can you post what swaybar end links you used for side attachment of the hardtop. Much appreciated.

Alex
Post Reply