Installation of RB sway bars or Progress Sways

Miata Parts, Intakes, Superchargers, Headers, Exhausts, Shocks, Springs, Sway Bars, Brake Kits, Autocross and track mods.
Post Reply
DanielD217
Posts: 2
Joined: Sat Nov 23, 2013 9:18 am

Installation of RB sway bars or Progress Sways

Post by DanielD217 »

I just bought an 06 MX5. Don't like the body roll so want to install better sways. As far as installation of the RB's over the progress bars I would like to know if the install is any more difficult with one over the other. Do any modifications need to be made to the car to install either one of these? I am new to this so have patience with me. Also which would be the best to install. I have my fun on very twisty mountain roads. I may try autocross at some point for fun but nothing serious.
Daniel
Brian
Site Admin
Posts: 11308
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Re: Installation of RB sway bars or Progress Sways

Post by Brian »

Both choices are simple bolt on, no permanent changes to car. Rear is about 10 minutes. Front takes a good hour or more the first time you do it. Progress front bar might be slightly more difficult because of the bigger diameter but just slightly.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
DanielD217
Posts: 2
Joined: Sat Nov 23, 2013 9:18 am

Re: Installation of RB sway bars or Progress Sways

Post by DanielD217 »

Thanks for the quick response Brian.
Post Reply