Mild upgrade to 2010 PRHT

Miata Parts, Intakes, Superchargers, Headers, Exhausts, Shocks, Springs, Sway Bars, Brake Kits, Autocross and track mods.
Post Reply
Txmiatadude
Posts: 2
Joined: Sun Sep 14, 2014 11:48 am

Mild upgrade to 2010 PRHT

Post by Txmiatadude »

I am looking to improve the performance of my 2010 PRHT on a very limited budget. I have added a cat back exhaust and currently just running a drop in K&N air filter. I also have installed Racing Beat Sway bars. Reading on this forum, I recall you were thinking of a reflash on your wife's 2012. If you did, who did you use? Also I would like to upgrade the intake. Who do you recommend?
Thanks
Brian
Site Admin
Posts: 11307
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Re: Mild upgrade to 2010 PRHT

Post by Brian »

Got MotoEast reflash in wife's car, nice to get rid of the second gear torque limitation.

As for intake, the AEM is the top seller, installs easily, etc.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Txmiatadude
Posts: 2
Joined: Sun Sep 14, 2014 11:48 am

Re: Mild upgrade to 2010 PRHT

Post by Txmiatadude »

Thanks Brian. Do you have the AEM intake installed on your wife's car or did you leave it stock?
Thanks
Brian
Site Admin
Posts: 11307
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Re: Mild upgrade to 2010 PRHT

Post by Brian »

I have not done intake on wife's car because not much gain to be found with intake IF you have already done the header. You didn't list doing the header already, but MUCH more gain in changing the header, see the dyno info in the product descriptions.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Post Reply