ND Spring Instalation

Miata Parts, Intakes, Superchargers, Headers, Exhausts, Shocks, Springs, Sway Bars, Brake Kits, Autocross and track mods.
Post Reply
JamesH423
Posts: 2
Joined: Fri Dec 11, 2015 8:46 pm

ND Spring Instalation

Post by JamesH423 »

Hello

This is my first time changing the springs on struts (2016 MX-5 Bilsting&Progressive). Are there any do or don'ts disassembling and reinstalling them besides torquing on the ground and again after 500 miles. I plan to compress the springs, loosen the nuts/bolts, change the springs, tighten, and do torque process. If there are any techniques I should be aware of I would appreciate your advice.

Thank you
Brian
Site Admin
Posts: 11308
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Re: ND Spring Instalation

Post by Brian »

It is pretty easy, only real issue to avoid is stuck bushings, see our ND progress spring product description for the factory service manual page on that.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Post Reply