MX5 NC AERO Project...Carbon Hardtop, Flat Bottom, Diffuser
Re: MX5 NC AERO Project...Carbon Hardtop, Flat Bottom, Diffu
too bad, that might have been a cheap easy weight reduction.
Gordon Andrade
06 Miata
COMSCC #10 SC
06 Miata
COMSCC #10 SC
Re: MX5 NC AERO Project...Carbon Hardtop, Flat Bottom, Diffu
We GOT TOPS!
WE ARE IN PRODUCTION.
Most of first batch sold...went to pro race teams who were standing in line to grab them.
Got one left of first batch for real world customers....but more following shortly.
It is in the store....here:
http://www.good-win-racing.com/Mazda-Pe ... -1006.html
WE ARE IN PRODUCTION.
Most of first batch sold...went to pro race teams who were standing in line to grab them.
Got one left of first batch for real world customers....but more following shortly.
It is in the store....here:
http://www.good-win-racing.com/Mazda-Pe ... -1006.html
- Attachments
-
- MX5_Miata_Carbon_Fiber_Hardtop.jpg (238.96 KiB) Viewed 9569 times
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: MX5 NC AERO Project...Carbon Hardtop, Flat Bottom, Diffu
That's gorgeous. Probably a dumb question, but does the window seal well enough to the carbon top to be used in rainy weather or has anyone reported any slight leaking from the window? Also, if I purchase the factory mounting hardware, latches, liner, and rear edge gasket, will that keep the top from leaking water from around the carbon top itself?
Long post short. If I leave it parked outside while it rains, will I come out to find water in the car, either from the window or top itself?
Long post short. If I leave it parked outside while it rains, will I come out to find water in the car, either from the window or top itself?
2008 Galaxy Grey Miata Sport 5 speed: TDR2 Turbo Kit, Goodwin Racing Q exhaust, H&R front and rear sway bars, Tein Flex coilovers, Stock LSD added, and 17X9 Enkei RPF1's with 245/40/17 Dunlop Direzza Sport Z1 Star Specs
Re: MX5 NC AERO Project...Carbon Hardtop, Flat Bottom, Diffu
Brian,
Looks very good. I was planning to get a factory top for my car for the winter, but I'd much rather get one of these, with the appropriate OEM bits to hold it down and seal it. I'm guessing it will seal around the outside just like the factory top, but, like nc4me, I'm concerned about the window. Does it have a seal around the Optix, or could I add one of my own?
This looks like a great product. Thanks.
Looks very good. I was planning to get a factory top for my car for the winter, but I'd much rather get one of these, with the appropriate OEM bits to hold it down and seal it. I'm guessing it will seal around the outside just like the factory top, but, like nc4me, I'm concerned about the window. Does it have a seal around the Optix, or could I add one of my own?
This looks like a great product. Thanks.
2009, STR & DD. 1995, HPDE. 2004 MSM, sold. 2010 Mazda3, hers.
Re: MX5 NC AERO Project...Carbon Hardtop, Flat Bottom, Diffu
Like the 2 others said, WOW, what a great looking product! Must be of the highest quality too!
I'm also in for the window thing...
I'm also in for the window thing...
Re: MX5 NC AERO Project...Carbon Hardtop, Flat Bottom, Diffu
Oh boy, that hardtop looks real good...
06 Sunlight Silver NC, Sport LSD.
H&R coilovers, Goodwin RACE exhaust, several other mods.(Sold)
19 Artic White ND2, Club with Brembo, BBS and Recaro
Goodwin Race exhaust, RoadsterSport suspension package
99 NB 10th Anniversary
H&R coilovers, Goodwin RACE exhaust, several other mods.(Sold)
19 Artic White ND2, Club with Brembo, BBS and Recaro
Goodwin Race exhaust, RoadsterSport suspension package
99 NB 10th Anniversary
Re: MX5 NC AERO Project...Carbon Hardtop, Flat Bottom, Diffu
Quick, one of you buy one and install it on a daily driver! Then write up an installation guide for all the necessary seals/fasteners/etc that will make it work (flawlessly/leaklessly mind you) when commuting on a rainy day.
Sure is a beautiful piece of work.
Sure is a beautiful piece of work.
-
- Posts: 32
- Joined: Sun Nov 02, 2008 7:03 pm
Re: MX5 NC AERO Project...Carbon Hardtop, Flat Bottom, Diffu
Gordy ... great idea
Quick, why don't you do it first?
Nice piece of work (again), Mr Goodwin.
Quick, why don't you do it first?
Nice piece of work (again), Mr Goodwin.
Re: MX5 NC AERO Project...Carbon Hardtop, Flat Bottom, Diffu
any updates on the aero kit!!??? heheheh
Re: MX5 NC AERO Project...Carbon Hardtop, Flat Bottom, Diffu
Had some requests to see how we attached the hardtop in our NC LIGHT.
Simple, two aluminum strap brackets at the front, and a link at each side.
Simple, two aluminum strap brackets at the front, and a link at each side.
- Attachments
-
- top bracket.jpg (108.29 KiB) Viewed 9058 times
-
- topbracket2.jpg (126.51 KiB) Viewed 9058 times
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com