Enkei PF01
-
- Posts: 15
- Joined: Mon Jan 19, 2015 4:25 pm
- Location: Christiansburg, Virginia
- Contact:
Re: Enkei PF01
Got my PF01 17x8 Silver wheels from Good Win Racing recently. Shod them with Hoosier R7s for upcoming track days. They look great! The wheels, I mean, even if they make painfully clear that it's time to lower the girl.
"Street Legal, Track Capable"
2009 Copper Ragtop 5-speed. AEM intake, GordyM seat lowering, Hard Dog M3 Sport roll bar, TDR ECU reflash, AiM MXL, Enkei PF01 17" wheels with Hoosier tires for track days.
2009 Copper Ragtop 5-speed. AEM intake, GordyM seat lowering, Hard Dog M3 Sport roll bar, TDR ECU reflash, AiM MXL, Enkei PF01 17" wheels with Hoosier tires for track days.
-
- Posts: 497
- Joined: Fri Oct 17, 2014 11:37 pm
Re: Enkei PF01
Enki PF01SS 17x9 with Toyo R1R 245/40/17 tires under DGMotorsports Super20 fender flares.
Pictures courtesy of customer Tom Taylor
Pictures courtesy of customer Tom Taylor
Re: Enkei PF01
I hope this is the right place to ask a couple of questions . I like the PFO1 in silver for my copper red 06 Brain has recommended the 17x8 for a street car but I see it is offered in both 45 and 50 offsets . I assume the 45 will give a little wider stance so my question is can I fit a 235x40x17 tire in that offset or would a 50 be better since it is closer to stock. I am mainly a street driver and mountain roads here in western NC. I might try a little autocoss and maybe some track time in the future but that's not my primary driving. Second question if I decide to add a BBK will the off set make a difference in fit under a 17 rim. I have the Miester Crd coil overs an am lowered to 12.5 front and 13 rear. I haven't done the alignment yet but I can see I now have some neg camber just from the coilovers . Thanks for any suggestions
Re: Enkei PF01
Yes, the 50mm is closer to stock and that 235/40 tire will easily clear.
The 45mm choice might need a fender lip roll to clear 235/40....depending on amount of lowering and amount of negative camber.
The 45mm choice might need a fender lip roll to clear 235/40....depending on amount of lowering and amount of negative camber.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
-
- Posts: 179
- Joined: Thu Apr 10, 2008 9:29 pm
Re: Enkei PF01
These tires & wheels are up for sale.
Got hurt at work so I'm out of work and the will be selling the car.
Re: Enkei PF01
Enkei PF01SS 17x9 +48mm Black
Picture Courtesy Customer Rudy Ghaly
Picture Courtesy Customer Rudy Ghaly
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: Enkei PF01
Picture Courtesy Customer Chad Zemer
Enkei PF01SS 17x8 wheels, Proxes R1R 235/40 Tires, MeisterR Clubrace coilovers and Progress sway bars
Enkei PF01SS 17x8 wheels, Proxes R1R 235/40 Tires, MeisterR Clubrace coilovers and Progress sway bars
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: Enkei PF01
Enkei PF01SS 17x9 +48mm 5x114.3 Black
Picture Courtesy Customer Kyle Kerns
Picture Courtesy Customer Kyle Kerns
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: Enkei PF01
Enkei PF01SS 17x9 +48mm 5x114.3 Black
Picture Courtesy Customer Paul Noonan
Picture Courtesy Customer Paul Noonan
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
-
- Posts: 47
- Joined: Mon Jun 28, 2010 5:19 pm
- Location: DFW