Our New 2012 PRHT SS Project....
Re: Our New 2012 PRHT SS Project....
Thanks for the info, Brian. Will the O2 sensor bungs be placed before and after the primary cat in the new header or by the secondary cat in the GWR midpipe?
Re: Our New 2012 PRHT SS Project....
Can't wait till the header is available. I've been following this thread and choices. I've got the AEM intake, RoadsterSport mid pipe and RoadsterSport "Q" exhaust. Picked them up last year for my '11 Soft Top. The sound is much better than stock but not loud. It's just as you described mellow at cruise but noticeable when you're on the throttle. It's a great combo for a daily driver.
Any word on when the Progress Sways will be available? I'm still debating on the spring/shock combo or just biting the bullet and getting a set of coil overs.
Keep up the great work on the products and the updates to the thread.
Any word on when the Progress Sways will be available? I'm still debating on the spring/shock combo or just biting the bullet and getting a set of coil overs.
Keep up the great work on the products and the updates to the thread.
Re: Our New 2012 PRHT SS Project....
Hi Pat,
Thanks for your interest in the project. My best guess is that the Progress Sways are still a month away.
By popular demand Progress has opened the question of a special NC2 set of springs, prototype set on the way to us for test fit. I checked heights on our 2012 and it may be the most level car from the factory that I have seen, each corner is precisely the same height. Thus, it will be a perfect test choice for the springs.
Thanks for your interest in the project. My best guess is that the Progress Sways are still a month away.
By popular demand Progress has opened the question of a special NC2 set of springs, prototype set on the way to us for test fit. I checked heights on our 2012 and it may be the most level car from the factory that I have seen, each corner is precisely the same height. Thus, it will be a perfect test choice for the springs.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: Our New 2012 PRHT SS Project....
That's good to hear, although I'm almost dead-set on coilovers by now. Do you recall the measurements f your 2012? My stock 2011 is exactly at 14.5" at EVERY corner.
My car: The 1995 RallyWays Miata
Re: Our New 2012 PRHT SS Project....
Brian,
Will this header hookup to the stock midpipe?
Will this header hookup to the stock midpipe?
2008 PRHT Touring True Red, MazdaSpeed body kit
RSII, RX8 Sways, KW V3 Coilovers
Kenwood DNX7100, Nautilis Horn
RSII, RX8 Sways, KW V3 Coilovers
Kenwood DNX7100, Nautilis Horn
Re: Our New 2012 PRHT SS Project....
Yes...Reitrof wrote:Brian,
Will this header hookup to the stock midpipe?
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: Our New 2012 PRHT SS Project....
Ours is exactly 1/16th higher all four corners.eluviis wrote:That's good to hear, although I'm almost dead-set on coilovers by now. Do you recall the measurements f your 2012? My stock 2011 is exactly at 14.5" at EVERY corner.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: Our New 2012 PRHT SS Project....
Thinking about front splitter....and rear spoiler and doing our own in Urethane. Keeping in the spirit of this project I don't want to go too crazy...but more than the overly conservative factory. Open to all ideas.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: Our New 2012 PRHT SS Project....
Rear splitter? What's that?
2009, STR & DD. 1995, HPDE. 2004 MSM, sold. 2010 Mazda3, hers.
Re: Our New 2012 PRHT SS Project....
skeeler wrote:Rear splitter? What's that?
Sorry..fat thumbs...Fixed...
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com