Page 37 of 74

Re: PROJECT ND: Parts Development, Testing, Measurements, DY

Posted: Sun Oct 02, 2016 12:02 pm
by Brian
TRACK TESTING NEW ND REAR DIFFUSER AT MAZDA RACEWAY LAGUNA SECA...TODAY!

Re: PROJECT ND: Parts Development, Testing, Measurements, DY

Posted: Tue Oct 04, 2016 12:07 pm
by Ryan @ GWR
Same pic, smaller resolution
Velox_GWRND_1small.jpg
Velox_GWRND_1small.jpg (65.84 KiB) Viewed 11997 times

Re: PROJECT ND: Parts Development, Testing, Measurements, DY

Posted: Tue Oct 04, 2016 12:53 pm
by Ryan @ GWR
More angles of the new diffuser!
Velox_GWRND_2.jpg
Velox_GWRND_3.jpg
Velox_GWRND_4.jpg

Re: PROJECT ND: Parts Development, Testing, Measurements, DY

Posted: Wed Oct 05, 2016 2:29 pm
by Brian
Shots of new Carbon Top at MRLS Event.

Re: PROJECT ND: Parts Development, Testing, Measurements, DY

Posted: Tue Oct 11, 2016 11:32 am
by Ryan @ GWR
ND_Carmel.JPG
Just dug this photo up from last year, driving around the town of Carmel after Miatas @ MRLS.

The thing I like so much about the ND is how it can serve multiple purposes, both daily driver and high performance toy. It does both with a big helping of fun factor mixed in, and without making big compromises either way - particularly with a GT model like we have. It's already very light by modern standards, no need to strip the interior out to save a few lbs. Our Roadstersport exhausts make it possible to have a dual-personality exhaust tone that is civilized during cruise and sings when you want it to, no booming or obnoxious noises to be found here. With a great set of suspension and brakes, you can drive all day long with great comfort and confidence and then drive right on to a race track and hit your apexes, then drive it right home. It's why I always go back to the Porsche analog when describing how well the ND can be set up to "do it all". I still think back to cruising up the California Coast Highway last year in the ND as one of my favorite moments ever in a car.

Re: PROJECT ND: Parts Development, Testing, Measurements, DY

Posted: Tue Oct 25, 2016 1:10 pm
by Ryan @ GWR
New front subframe braces being tested! Pics are fitted to the Fiat but these fit both ND and Fiat the same.

A pair of triangular side braces tie the rear of the front subframe to the chassis:
FSubframe Brace 1.jpg
And a cross-brace slides within the factory under panel and ties the two sides together:
FSubframe Brace 2.jpg
From below with all three pieces installed:
FSubframe Brace 3.jpg

Re: PROJECT ND: Parts Development, Testing, Measurements, DY

Posted: Tue Oct 25, 2016 1:12 pm
by Ryan @ GWR
New sway bar prototypes being tested. Still finalizing details but our aim with these is a balanced, moderate amount of body roll reduction for comfortable road use with aggressive pricing.
GWR_ND_Sways_P2.jpg
GWR_ND_Sways_P3.jpg

Re: PROJECT ND: Parts Development, Testing, Measurements, DY

Posted: Sun Oct 30, 2016 9:23 am
by Brian
Getting ready for Time Attack, showing what is effectively the Spec Tire for the event,
220 Treadwear Achilles 123S 255/35 R17 on Bronze 17x9 6UL

Re: PROJECT ND: Parts Development, Testing, Measurements, DY

Posted: Sun Oct 30, 2016 11:08 am
by Brian
Full HDR just for you guys wanting a new Screen Saver to drool over... :mrgreen:

Re: PROJECT ND: Parts Development, Testing, Measurements, DY

Posted: Mon Oct 31, 2016 5:18 am
by Brian
Expected to be released at SEMA this week....

TVS900 Supercharger!