Page 41 of 74
Re: PROJECT ND: Parts Development, Testing, Measurements, DY
Posted: Wed Jan 25, 2017 8:10 am
by BillK336
^^^ Correct thread is M10x10.25. And don't fully compress the spring.
Re: PROJECT ND: Parts Development, Testing, Measurements, DY
Posted: Mon Feb 06, 2017 11:27 am
by jlbeas13
Hello Brian. Is it a good idea to run FCM's 58 mm bump stops (Red for the front, White for the rear) on the ND for C Street? I am using the Karcepts Bar and Koni's. I see that you offer bump stops for a lowered ND but nothing for C Street.
Thanks!
Re: PROJECT ND: Parts Development, Testing, Measurements, DY
Posted: Tue Feb 07, 2017 12:05 pm
by Sean @ GWR
More FUN from this weekends autocross with the 949 Racing Crew.
Re: PROJECT ND: Parts Development, Testing, Measurements, DY
Posted: Mon Mar 06, 2017 6:54 pm
by Brian
Spring Rates Comparison ND/Fiat Chassis
ND Spring rates Front lbs/inch Rear lbs/inch
OEM MX5 Non-Club Sport 156 80
OEM MX5 CLUB 156 100 (reportedly)
OEM Fiat Classica 160 85
OEM Fiat Abarth 160 105
Progress Springs 185 115
Progress Springs RF 185 135
GWR RoadsterSport 300 200
COPYRIGHT Good-Win Racing 2017. All of these measured except those rear Club ND which are reported to us as 100....but we have not had a set to check.
Re: PROJECT ND: Parts Development, Testing, Measurements, DY
Posted: Sun Mar 12, 2017 8:02 am
by Brian
Beryllium 6UL 17x9 on the ND that set Top Time of Day again yesterday in field of over 100 competitors....love this car!
Re: PROJECT ND: Parts Development, Testing, Measurements, DY
Posted: Thu Mar 16, 2017 8:51 am
by Brian
Anybody seen my ND Motor....swear it was here yesterday.
Re: PROJECT ND: Parts Development, Testing, Measurements, DY
Posted: Thu Mar 16, 2017 3:41 pm
by Sean @ GWR
Shiny! Building a stronger transmission for our Project Race ND, big thanks to our friends at Long Road Racing for developing these. Available exclusively through Mazda Motorsports Development.
0000-02-5803-01 3rd Gear –Main Shaft $635.00
0000-02-5803-02 3rd Gear –Counter Shaft $305.00
0000-02-5804-01 4th Gear –Main Shaft $635.22
0000-02-5804-02 4th Gear –Counter Shaft $304.78
Re: PROJECT ND: Parts Development, Testing, Measurements, DY
Posted: Mon Mar 20, 2017 2:32 pm
by Ryan @ GWR
Random detail pics of the day.. Mazda did a nice job on the heat shielding on the transmission tunnel in the ND.
Re: PROJECT ND: Parts Development, Testing, Measurements, DY
Posted: Sat Mar 25, 2017 9:35 am
by olgzr
Curious about your intentions with the ND. A larger engine perhaps???
Re: PROJECT ND: Parts Development, Testing, Measurements, DY
Posted: Thu Mar 30, 2017 2:15 pm
by Brian
165 grams per second...not bad.
