New Good-Win Racing Project ND RF!

Miata Parts, Intakes, Superchargers, Headers, Exhausts, Shocks, Springs, Sway Bars, Brake Kits, Autocross and track mods.

Re: New Good-Win Racing Project ND RF!

Postby NathalieS194 » Fri Aug 18, 2017 11:54 pm

Very excited.
More and more waiting for with your description!

I already have Cams/Head and a Mishimoto oil cooler.
I plan the SC. No issue expected with the tune and to fit the "big beat exchanger"?
NathalieS194
 
Posts: 2
Joined: Thu Aug 18, 2016 11:52 pm

Re: New Good-Win Racing Project ND RF!

Postby Brian » Sat Aug 19, 2017 5:56 am

Mishi oil cooler will need to be moved, heat exchanger lives in the same spot.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Brian
Site Admin
 
Posts: 7848
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA

Re: New Good-Win Racing Project ND RF!

Postby NathalieS194 » Sat Aug 19, 2017 10:51 am

Good to know.
Hope you'll be able to propose a relocation solution (not too far in your prio list :wink:)
NathalieS194
 
Posts: 2
Joined: Thu Aug 18, 2016 11:52 pm

Re: New Good-Win Racing Project ND RF!

Postby NathanD277 » Sat Aug 19, 2017 10:56 am

Is Mat working on the tuning for this? I don't know if that's something you can discuss yet, but if you can…
2016 Meteor Gray M6 Club BBS/Brembo
Progress springs, GWR long tube, GWR SS twin tip, Corksport CAI, OVTune on E85
NathanD277
 
Posts: 60
Joined: Tue May 24, 2016 10:32 am

Re: New Good-Win Racing Project ND RF!

Postby Brian » Sat Aug 19, 2017 11:05 am

NathanD277 wrote:Is Mat working on the tuning for this? I don't know if that's something you can discuss yet, but if you can…


Yes, Mat spent the entire morning in the RF....and got solid results, big gains over the CARB tune result.

Perhaps more important....is that Mat came away super impressed with the Edelbrock hardware efficiency. He noted it was more efficient and took more timing than any of the turbo kits, super impressive work Edelbrock did on the hardware.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Brian
Site Admin
 
Posts: 7848
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA

Re: New Good-Win Racing Project ND RF!

Postby NathanD277 » Sat Aug 19, 2017 11:17 am

Wow! I'm sure that fuel economy is about the same as stock if you can keep your foot out of it, right?

This option is sounding better and better.
2016 Meteor Gray M6 Club BBS/Brembo
Progress springs, GWR long tube, GWR SS twin tip, Corksport CAI, OVTune on E85
NathanD277
 
Posts: 60
Joined: Tue May 24, 2016 10:32 am

Re: New Good-Win Racing Project ND RF!

Postby Brian » Sat Aug 19, 2017 11:23 am

NathanD277 wrote:Wow! I'm sure that fuel economy is about the same as stock if you can keep your foot out of it, right?

This option is sounding better and better.


On my 100 mile freeway non-stop blast....with lots of ENTHUSIASTIC passing, I still averaged 34.6 mpg.

I think that's amazing, and most folks do better...I got a really heavy foot!
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Brian
Site Admin
 
Posts: 7848
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA

Re: New Good-Win Racing Project ND RF!

Postby Brian » Sat Aug 19, 2017 12:35 pm

Awesome!

This was recorded in 4k with stereo mics....but uploaded to Youtube where it is still good 1080P if you click the gear and select their high def option. I could have taken the time to put it on Vimeo, but figured we will do much more extensive samples as time permits.

Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Brian
Site Admin
 
Posts: 7848
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA

Re: New Good-Win Racing Project ND RF!

Postby rastap » Sat Aug 19, 2017 5:12 pm

I want one so bad I can taste it! :mrgreen:
rastap
 
Posts: 7
Joined: Thu Feb 18, 2010 2:54 pm
Location: Los Angeles

Re: New Good-Win Racing Project ND RF!

Postby ffalcone » Sat Aug 19, 2017 8:03 pm

Cali is a long ways away... Any recommendations for good installers in SE Florida that would satisfy the Edelbrock warranty?

Frank
ffalcone
 
Posts: 1
Joined: Sat Aug 19, 2017 2:22 pm

Re: New Good-Win Racing Project ND RF!

Postby Brian » Sun Aug 20, 2017 4:00 pm

ffalcone wrote:Cali is a long ways away... Any recommendations for good installers in SE Florida that would satisfy the Edelbrock warranty?

Frank


Try the Dealer locator on their site.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Brian
Site Admin
 
Posts: 7848
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA

Re: New Good-Win Racing Project ND RF!

Postby LAMike » Mon Aug 21, 2017 11:45 am

Looks super clean. What is the expected hp gain with the CARB tune and non tune?
Also is the installation manual available?
Thank you.
-Michael
LAMike
 
Posts: 5
Joined: Wed Aug 09, 2017 11:06 pm

Re: New Good-Win Racing Project ND RF!

Postby Brian » Mon Aug 21, 2017 7:08 pm

Sorry, don't know when Edelbrock will be finished with their tune, they go for OEM level of smoothness AND they are seeking to pass the stringent CARB testing, and that takes a lot of time and investment. I met their head guy on tuning the project, spent time with him on the dyno, he indicated more work to come still with CARB tune.

We don't yet have PDF version of the manual to post, though hope to have that very soon.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Brian
Site Admin
 
Posts: 7848
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA

Re: New Good-Win Racing Project ND RF!

Postby LAMike » Mon Aug 21, 2017 8:57 pm

Will the CARB sc then not be available next month?
LAMike
 
Posts: 5
Joined: Wed Aug 09, 2017 11:06 pm

Re: New Good-Win Racing Project ND RF!

Postby Brian » Tue Aug 22, 2017 5:39 am

LAMike wrote:Will the CARB sc then not be available next month?


Possible, don't yet know for sure if any kits escape before CARB kits.

LATER EDIT....now understand we have 10 Tuner Kits on the Way!
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Brian
Site Admin
 
Posts: 7848
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA

PreviousNext

Return to Mazda Miata and Fiat 124

Who is online

Users browsing this forum: Bing [Bot], Google [Bot] and 5 guests