Tokico HTS recomended settings with eibach springs?

Miata Parts, Intakes, Superchargers, Headers, Exhausts, Shocks, Springs, Sway Bars, Brake Kits, Autocross and track mods.
Post Reply
cmos9
Posts: 45
Joined: Sat Jan 27, 2007 12:15 am

Tokico HTS recomended settings with eibach springs?

Post by cmos9 »

Brian,
I just purchased the tokico HTS shocks, eibach springs and eibach sway bars for my NC and am in the middle of installing everything.

What setting do you recomend for the HTS shocks with these springs? The manual says 4 turns from full hard to start with.

The rear sway bar should be installed at the hole farthest to the end?

Moving to the other hole would cause the car to oversteer more?

thanks,
Peter
Brian
Site Admin
Posts: 11339
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Post by Brian »

Yep, start with the manual suggestion on the HTS and then tune to taste.

Yes, the outer hole in the sway will error on the safe side...understeer. If you find you have too much understeer then move the hole inward which will effectively raise the rate of the bar.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Post Reply