Brian,
I just purchased the tokico HTS shocks, eibach springs and eibach sway bars for my NC and am in the middle of installing everything.
What setting do you recomend for the HTS shocks with these springs? The manual says 4 turns from full hard to start with.
The rear sway bar should be installed at the hole farthest to the end?
Moving to the other hole would cause the car to oversteer more?
thanks,
Peter
Tokico HTS recomended settings with eibach springs?
Yep, start with the manual suggestion on the HTS and then tune to taste.
Yes, the outer hole in the sway will error on the safe side...understeer. If you find you have too much understeer then move the hole inward which will effectively raise the rate of the bar.
Yes, the outer hole in the sway will error on the safe side...understeer. If you find you have too much understeer then move the hole inward which will effectively raise the rate of the bar.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com