JIC magic

Miata Parts, Intakes, Superchargers, Headers, Exhausts, Shocks, Springs, Sway Bars, Brake Kits, Autocross and track mods.
Post Reply
Crabwalktechnic
Posts: 4
Joined: Sun Jan 15, 2006 12:43 am
Contact:

JIC magic

Post by Crabwalktechnic »

I have a question about the JIC suspension for the NC. I would like more camber but I'm told the factory suspension doesn't have that much adjustment. I noticed that JIC lists upper front and rear camber arms for the rear (the part number is the same as the RX-8). I only need about 1 more degree of negative camber.

Does anyone make plates for the front? I would like more camber on both.

Any help would be great. Thanks

~CT
Brian
Site Admin
Posts: 11308
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Post by Brian »

A totally stock RX8 can get 1 degree negative camber on the alignment rack. If you plan to lower your RX8 then the range increases and we run 2.2 negative all around with the JICs on our RX8.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Post Reply