MX5 NC AERO Project...Carbon Hardtop, Flat Bottom, Diffuser
Re: MX5 NC AERO Project...Carbon Hardtop, Flat Bottom, Diffu
Actually, we can custom a flat bottom for you George....we just can't easily get a kit made. But custom would mean coming to California and about 4k. Reducing that to a kit under 1k has been the issue we can't seem to get nailed down....at least so far.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: MX5 NC AERO Project...Carbon Hardtop, Flat Bottom, Diffu
would there be any advantage to running a flat bottom without the rear diffusor section?
Re: MX5 NC AERO Project...Carbon Hardtop, Flat Bottom, Diffu
yes, flat bottom helps....with or without the rear diffuser.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: MX5 NC AERO Project...Carbon Hardtop, Flat Bottom, Diffu
More photos of our front aero piece.
- Attachments
-
- Miata-MX5_FRONTSPLITTER.jpg (52.66 KiB) Viewed 9261 times
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: MX5 NC AERO Project...Carbon Hardtop, Flat Bottom, Diffu
Another pic...
- Attachments
-
- front-mx5-splitters.jpg (67.54 KiB) Viewed 9261 times
-
- splitter-frontMX5.jpg (83.68 KiB) Viewed 9261 times
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: MX5 NC AERO Project...Carbon Hardtop, Flat Bottom, Diffu
Nice.
add this to my list...
add this to my list...
Re: MX5 NC AERO Project...Carbon Hardtop, Flat Bottom, Diffu
Thanks for the pictures, the lip looks very nice.... simple and beautiful...
Re: MX5 NC AERO Project...Carbon Hardtop, Flat Bottom, Diffu
Brian - do you have any pics of how the lip attaches?Brian wrote:Another pic...
Re: MX5 NC AERO Project...Carbon Hardtop, Flat Bottom, Diffu
I don't but it is real simple. Look in the lower 'mouth' of the car. This splitter has an upper lip that slides into that lower mouth fits snug over the lower lip in the that lower mouth of the car. Then it comes out, and wraps down around the lower edges on eash side of that lower 'mouth' and has FOUR holes on each outer edge bottom to screw into the factory bottom. Comes with the hardware.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: MX5 NC AERO Project...Carbon Hardtop, Flat Bottom, Diffu
Thanks for the explanation. I noticed that upper lip before I posted about it.
In stock ready to ship?
In stock ready to ship?