MX5 NC AERO Project...Carbon Hardtop, Flat Bottom, Diffuser
Re: MX5 NC AERO Project...Carbon Hardtop, Flat Bottom, Diffu
Made to order each time...takes a few days to get each one out.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: MX5 NC AERO Project...Carbon Hardtop, Flat Bottom, Diffu
are you working on an 09 application? you'd be the first. this is an item i would buy from gwr because you verify that it's functional.
Re: MX5 NC AERO Project...Carbon Hardtop, Flat Bottom, Diffu
Sorry, have yet to look at fitment of it to 09.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: MX5 NC AERO Project...Carbon Hardtop, Flat Bottom, Diffu
AERO WORKS!
Finally got NCLIGHT back on track with the FULL FLAT BOTTOM, splitter, top, and rear diffuser. It was a revelation! Car is amazing in the corners. Full report on the event in the NCLIGHT thread HERE
Finally got NCLIGHT back on track with the FULL FLAT BOTTOM, splitter, top, and rear diffuser. It was a revelation! Car is amazing in the corners. Full report on the event in the NCLIGHT thread HERE
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
-
- Posts: 1
- Joined: Tue Aug 28, 2012 1:09 pm
Re: MX5 NC AERO Project...Carbon Hardtop, Flat Bottom, Diffu
How do you think this would hold up in a roll over compared to the factory fiberglass hardtop? I imagine the CF is a bit stronger.
Would it get a car HPDE approved with just the factory NC roll hoops? I know it's not the safest solution, but it would require the least amount of factory interior modification.
Would it get a car HPDE approved with just the factory NC roll hoops? I know it's not the safest solution, but it would require the least amount of factory interior modification.
Re: MX5 NC AERO Project...Carbon Hardtop, Flat Bottom, Diffu
Sorry I didn't see this before, it was a few pages deep. The carbon does not have much strength in the direction except in the direction the fibers run. So, no significant roll strength or protection from the tops (whether factory fiberglass or our carbon).Miatamonkey wrote:How do you think this would hold up in a roll over compared to the factory fiberglass hardtop? I imagine the CF is a bit stronger.
Would it get a car HPDE approved with just the factory NC roll hoops? I know it's not the safest solution, but it would require the least amount of factory interior modification.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: MX5 NC AERO Project...Carbon Hardtop, Flat Bottom, Diffu
Did the flat bottom and diffuser ever make it to production?
Re: MX5 NC AERO Project...Carbon Hardtop, Flat Bottom, Diffu
'Dubcity wrote:Did the flat bottom and diffuser ever make it to production?
Nope, it was too involved and too niche.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: MX5 NC AERO Project...Carbon Hardtop, Flat Bottom, Diffu
I guess your right.Aero is not really for everyone.