RX8 Tein Basic Coilovers on NC
Posted: Mon Oct 18, 2010 8:09 pm
Just curious as to what some of you gear heads think of that set up.
Spring rates are 450F and 340R. The front coilover is not my concern as it is the same length as the NC coilovers, the rear Im slightly worried about. Since the rears are longer, by a margin, will I still be able to lower the car 1.5-2" int he back? Tein indicates that the lowering range is "-0.16" to -1.34," That doesn't mean much to me...Brian, can you shed some light on this?
I'm just worried that if the rear is longer, it wont lower quite enough. I will be running 17x8 with a 335/40.
Thanks in advance.
Spring rates are 450F and 340R. The front coilover is not my concern as it is the same length as the NC coilovers, the rear Im slightly worried about. Since the rears are longer, by a margin, will I still be able to lower the car 1.5-2" int he back? Tein indicates that the lowering range is "-0.16" to -1.34," That doesn't mean much to me...Brian, can you shed some light on this?
I'm just worried that if the rear is longer, it wont lower quite enough. I will be running 17x8 with a 335/40.
Thanks in advance.