Getting bits together for my NC CW install
Is a 2 bar MAP sensor required in place of the std one which I assume is only 1 bar for unboosted engines.
Cosworth 2 BAR MAP sensor
Cosworth 2 BAR MAP sensor
Rob Young
Black 2005 NCLE GWR Exh, Cosworth, Mototune, Ohlins, PF01
Black 2005 NCLE GWR Exh, Cosworth, Mototune, Ohlins, PF01
Re: Cosworth 2 BAR MAP sensor
We have not been changing out the sensors with Cosworth installs....has not been an issue.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: Cosworth 2 BAR MAP sensor
G'day Brian,
My understanding is that the std map will max out at 3lb.
Wouldn't it be advantageous for the ECU to 'see' map right up to max boost?
My understanding is that the std map will max out at 3lb.
Wouldn't it be advantageous for the ECU to 'see' map right up to max boost?
Rob Young
Black 2005 NCLE GWR Exh, Cosworth, Mototune, Ohlins, PF01
Black 2005 NCLE GWR Exh, Cosworth, Mototune, Ohlins, PF01
Re: Cosworth 2 BAR MAP sensor
I suppose you would get better resolution on a 2 bar but I don't know anybody taking advantage of an upgraded sensor. Perhaps some customer is doing so and can chime in as to whether they found a tuning advantage.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com