I was in AX on friday, and after it ends i went to eat somthing. whan I started my car - the clutch refuse to separate and i could not change gears.
After i manage to put the first gear, my clutch pedal did not jump back and i needed to use my leg in order to return the padal to its place.
I do not know if its mean that my clutch is died or that i need to replace the clutch pump?
Please help...
NC clutch issue
Re: NC clutch issue
Hmmm...did you bleed the clutch line ahead of time? It sounds like you have clutch/brake fluid leaking (like when I flush the system, that's how the pedal behaves). Is your brake fluid reservoir low/empty or have any leaks under the car?
Re: NC clutch issue
Yep, sounds like some kind of hydraulic failure. Could be as simple as low fluid but likely a leak, slave, or line failure.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: NC clutch issue
And were can i check the breaking fluid level?
I saw one spot for "stering fluid - is it the same?
I saw one spot for "stering fluid - is it the same?
Re: NC clutch issue
Can i get "Braided Stainless Steel Clutch Line" for the NC?
Re: NC clutch issue
You can but I don't think it's worth it. The clutch line isn't under that much pressure.
The brake/clutch fluid reservoir is up against the firewall on the left-hand side in the US (might be on the right hand side elsewhere). I'd look in your owner's manual for the exact location.
Good luck.
The brake/clutch fluid reservoir is up against the firewall on the left-hand side in the US (might be on the right hand side elsewhere). I'd look in your owner's manual for the exact location.
Good luck.
Re: NC clutch issue
I took in to the garage - it is one of the clutch pumps.
They will order the 2 punps and than we can check which one is not functioning.
They will order the 2 punps and than we can check which one is not functioning.