Page 1 of 1

GWR Headers

PostPosted: Fri Jul 01, 2011 7:25 pm
by NC 2.0 IN OZ
Just had installed GWR Headers (onto stock mid-pipe and Roadster Q Muffler).

Thanks Brian, looks and sounds great. Headers arrived in West Coast Australia within a week of leaving CA. Great service all around.

The shop that installed left off 3 of the heat shields.
The shield that bolts onto the side bulkhead (shields the brake lines)..
Has anyone left this off or have they re-installed the shield?
Would it be OK to leave off or best to put back on?

Up-side is can see the Headers better with it off.

Thanks. John

Re: GWR Headers

PostPosted: Sat Jul 02, 2011 3:12 am
by Oz
Don't know that I'd like almost the entire brake system including the booster sitting there with all that radiated heat.
I installed the shield just to be safe.

Pulled the baffles out of my Q actually sounds quieter!? and the bumometer thinks it goes harder too.

Re: GWR Headers

PostPosted: Sat Jul 02, 2011 8:42 am
by Brian
Yes, put the shield back on that protects the brake lines.