Page 1 of 1

MX-5 vs RX-8 front control arms

Posted: Thu Sep 08, 2011 2:48 pm
by ronbauer
Anyone know whether the front lower control arms use the same sized bushings? I see that Mazda Motorsports has an offset bushing for the RX-8 to be able to get more camber. Would like to use on my DP car, but they're spendy, so I don't want to order until I know they'll fit.

Ron

Re: MX-5 vs RX-8 front control arms

Posted: Thu Sep 08, 2011 5:13 pm
by Brian
Great question Ron. Sorry that I don't know but please let us know what you find out.

Re: MX-5 vs RX-8 front control arms

Posted: Sun Sep 11, 2011 5:19 am
by ronbauer
Apparently all i needed was a little research. As it turns out, the part number for the stock bushing is the same on the 2009 cars, so the offset bushings should work with no problems. According to Mazda Motorsports, it's good for about 0.6 degrees of extra negative camber.

Ron

Re: MX-5 vs RX-8 front control arms

Posted: Wed Oct 05, 2011 11:06 am
by OZMDD
So to clarify, the offset bushing will work as a direct-fit replacement on 2009+ MX-5's only, or only FROM a 2009+ RX8? Or is this a bushing that can be fit on any year MX-5? Thanks.