'92 NA + H&R sway bars: question about Racing Beat endlinks

Miata Parts, Intakes, Superchargers, Headers, Exhausts, Shocks, Springs, Sway Bars, Brake Kits, Autocross and track mods.
Post Reply
Fletch
Posts: 1
Joined: Tue May 29, 2012 6:58 am

'92 NA + H&R sway bars: question about Racing Beat endlinks

Post by Fletch »

Hi there,
I would like to use the Racing Beat endlinks on my 1992 NA with H&R sway bars and Ohlins Road and Track DFV coilovers.
I've read that if it's lowered more than an inch it would be better to install the RB endlinks intended for FRONT 99-05.
My question is: are the FRONT 99-05 endinks intended also for the rear sway-bar?
Thanks in advance.
Brian
Site Admin
Posts: 11307
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Re: '92 NA + H&R sway bars: question about Racing Beat endli

Post by Brian »

Yes, same link works front and rear if lowered more than an inch. The only difference is the stud supplied in the kit is slightly shorter. Note that our various ball/socket designs offer superior range of motion (PowerGrid, Whiteline,).
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Post Reply