Racing Beat bars & end links

Miata Parts, Intakes, Superchargers, Headers, Exhausts, Shocks, Springs, Sway Bars, Brake Kits, Autocross and track mods.
Post Reply
TimW536
Posts: 1
Joined: Wed Jun 05, 2013 2:45 pm

Racing Beat bars & end links

Post by TimW536 »

Got the Racing Beat ARBs and end links installed today, heading onto the scales tomorrow (also finished coilover install). Was expecting the end links to have RH & LH threads so as to adjust length and zero the bar at static ride height. But they were both RH threads on the stud between.

Whats the technique to ensure the ARB is not loaded at static right height? Is removing the end links to adjust really the only way?

TIA.

Tim
Brian
Site Admin
Posts: 11308
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Re: Racing Beat bars & end links

Post by Brian »

Yes, the RB links are a bargain but part of the low cost compromise is that you do need to disconnect one end to get them set to length you want while fully unloaded.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Post Reply