ND Spring Instalation
Posted: Fri Jul 01, 2016 6:39 pm
Hello
This is my first time changing the springs on struts (2016 MX-5 Bilsting&Progressive). Are there any do or don'ts disassembling and reinstalling them besides torquing on the ground and again after 500 miles. I plan to compress the springs, loosen the nuts/bolts, change the springs, tighten, and do torque process. If there are any techniques I should be aware of I would appreciate your advice.
Thank you
This is my first time changing the springs on struts (2016 MX-5 Bilsting&Progressive). Are there any do or don'ts disassembling and reinstalling them besides torquing on the ground and again after 500 miles. I plan to compress the springs, loosen the nuts/bolts, change the springs, tighten, and do torque process. If there are any techniques I should be aware of I would appreciate your advice.
Thank you