PROJECT FIAT 124, Testing, Measurements, Dyno, etc

Miata Parts, Intakes, Superchargers, Headers, Exhausts, Shocks, Springs, Sway Bars, Brake Kits, Autocross and track mods.

Re: PROJECT FIAT 124, Testing, Measurements, Dyno, etc

Postby Sean @ GWR » Mon Mar 19, 2018 1:23 pm

Euro Compulsion intercooler installation in the shop for a customer. MUCH bigger than the factory intercooler and a quality core.

27035577898_62c9173d09_o.jpg


27035577848_d9bf358a20_o.jpg
Sean @ GWR
 
Posts: 80
Joined: Wed Oct 22, 2014 12:55 pm

Re: PROJECT FIAT 124, Testing, Measurements, Dyno, etc

Postby LateNights » Tue Apr 17, 2018 2:44 am

Image

https://www.motoring.com.au/geneva-moto ... op-111347/

Pretty sure I owe you a beer Mr.Goodwin!
LateNights
 
Posts: 45
Joined: Sun Jul 23, 2017 1:21 am
Location: Brisbane, Australia

Re: PROJECT FIAT 124, Testing, Measurements, Dyno, etc

Postby Brian » Fri Apr 20, 2018 10:07 am

FiatH.jpg
Helmholtz Chamber experiments....
Attachments
Fiatha.jpg
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Brian
Site Admin
 
Posts: 8608
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA

Re: PROJECT FIAT 124, Testing, Measurements, Dyno, etc

Postby Brian » Sun Apr 22, 2018 6:43 pm

Another SCCA weekend competition in the Fiat 124, different tires this time, had some understeer and had to dial front Ohlins to full soft to get some control over that but eventually got the balance good enough for fast times.

FiatRaceReady.jpg


Still...continue to love the Fiat responsiveness with the reflash, car is fast and consistent in a way that it NEVER was with stock calibration.


Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Brian
Site Admin
 
Posts: 8608
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA

Re: PROJECT FIAT 124, Testing, Measurements, Dyno, etc

Postby LateNights » Mon Apr 23, 2018 11:04 am

Brian wrote:Helmholtz Chamber experiments....

Happy 4/20 :mrgreen:

Very interested to see how these turn out - I've been back & forth between the 124 / RF - but this may seal it for the Abarth.

((Australian spec - please tell me your distributers "down under" will be able to get a hold of these??))

You bloody legend!
LateNights
 
Posts: 45
Joined: Sun Jul 23, 2017 1:21 am
Location: Brisbane, Australia

Re: PROJECT FIAT 124, Testing, Measurements, Dyno, etc

Postby njaremka » Tue Apr 24, 2018 5:23 am

Brian wrote:
FiatH.jpg
Helmholtz Chamber experiments....


Any sound difference from one side to the other? Or are you just playing around with the packaging layout?
njaremka
 
Posts: 80
Joined: Fri Dec 17, 2010 10:31 am

Re: PROJECT FIAT 124, Testing, Measurements, Dyno, etc

Postby Brian » Tue Apr 24, 2018 5:45 am

njaremka wrote:
Brian wrote:
FiatH.jpg
Helmholtz Chamber experiments....


Any sound difference from one side to the other? Or are you just playing around with the packaging layout?



Side makes no difference. It's not obvious but passenger side install is a much bigger unit....sitting higher up under the car and we want the slight weight gain in that corner to best help offset the driver.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Brian
Site Admin
 
Posts: 8608
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA

Re: PROJECT FIAT 124, Testing, Measurements, Dyno, etc

Postby njaremka » Tue Apr 24, 2018 6:16 am

Brian wrote:
njaremka wrote:
Brian wrote:
FiatH.jpg
Helmholtz Chamber experiments....


Any sound difference from one side to the other? Or are you just playing around with the packaging layout?



Side makes no difference. It's not obvious but passenger side install is a much bigger unit....sitting higher up under the car and we want the slight weight gain in that corner to best help offset the driver.


Now that you mention the size difference, I see it now...
njaremka
 
Posts: 80
Joined: Fri Dec 17, 2010 10:31 am

Re: PROJECT FIAT 124, Testing, Measurements, Dyno, etc

Postby LateNights » Tue May 01, 2018 3:48 am

Is it too soon to ask about turbo replacement ideas?

I'd like your thoughts on larger, more intensive replacements as well as straight plug-n-play (thinking ball bearing options - possibly even smaller "hybrid" turbos)?

Any others want to chime in on whether they'd prefer a smaller optimised drop-in vs going whole hog with a big snail??

One other possibility to consider is the value of a larger turbo vs swapping in the 1.8l from the Alfa 4c etc?

(Pretty sure that's what they've done with the rally cars?)

"Obviously", it's far more practical to swap turbos, but I've read elsewhere the ceiling for the 1.8 is far, far beyond what the 1.4 is capable of - enough so that anyone looking at throwing some serious $'s at these bad-boys might take it into consideration?
LateNights
 
Posts: 45
Joined: Sun Jul 23, 2017 1:21 am
Location: Brisbane, Australia

Re: PROJECT FIAT 124, Testing, Measurements, Dyno, etc

Postby Brian » Tue May 01, 2018 7:41 am

Likely we go with a stuffed turbo. First will see what we can do with E85 on stock turbo....soon.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Brian
Site Admin
 
Posts: 8608
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA

PreviousNext

Return to Mazda Miata and Fiat 124

Who is online

Users browsing this forum: Google [Bot] and 3 guests