NA Performance street allignment

Miata Parts, Intakes, Superchargers, Headers, Exhausts, Shocks, Springs, Sway Bars, Brake Kits, Autocross and track mods.
Post Reply
NC MX-5
Posts: 3
Joined: Sun Mar 31, 2013 12:36 am
Location: Nevada

NA Performance street allignment

Post by NC MX-5 »

Hello all, looking for performance street alignment settings on my recently purchased 1995 Miata. Only performance items on car is 15x8's with 205/50/15 RE71r's, and a roll bar. Car will ride at stock ride height, until money to pay for coilovers in the future, when it will be re-aligned. Car had inside wear on original front tires and looking to preserve my 200tw on my new tires as much as possible, while still benefiting from the street performance specs. Thx.
Brian
Site Admin
Posts: 10549
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Re: NA Performance street allignment

Post by Brian »

Inside wear at stock height is odd, my guess is lots of toe out currently. So, check toe. Those tires live such a short life, nothing is really going to 'preserve' their life but here is a relatively conservative mix of settings.

Front
Camber -1.2
Toe Zero
Caster 6.5

Rear
Camber -1.2
Toe IN 1/32 per side
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
NC MX-5
Posts: 3
Joined: Sun Mar 31, 2013 12:36 am
Location: Nevada

Re: NA Performance street allignment

Post by NC MX-5 »

Thank you very much.
1995 Mazda Miata
Hard dog Roll Bar
15x8 6UL
205/50/15 RE71r's
Post Reply