ND Brembo Brake Job
Posted: Sun Dec 12, 2021 2:55 pm
To track-day prepare my new acquisition of a ND2 with the BBS/Brembo brake option, I upgrading the following as the first priority - braking. I have one question on the brake lines, and welcome any comments or concerns. Thank you!
Item 1:
Stainless Steel Brake Lines. *Question: does the Techna-Fit MX5 ND for Brenbo include the two piece front brake lines?
Item 2:
Porterfield R4 Brake Pad - Front MX-5 Club Model Brembo
Track Use and driving home
Item 3:
Porterfield R4 Brake Pad - Rear Track Use
Item 4: Flush out DOT 3 Brake fluid and go to Motul MTL100949 8068HL RBF 600 Factory Line Dot-4
I have a Mission Automotive Brake Bleeding device that makes this job easy.
Item 5: ADVAN A052 tires 205/45R17 on the factory BBS wheels. The 200 TW tires should provide better high speed stopping capability that current 300 TW tires in the dry. I'll need some future track rain tires.
Image of front brake lines attached
Item 1:
Stainless Steel Brake Lines. *Question: does the Techna-Fit MX5 ND for Brenbo include the two piece front brake lines?
Item 2:
Porterfield R4 Brake Pad - Front MX-5 Club Model Brembo
Track Use and driving home
Item 3:
Porterfield R4 Brake Pad - Rear Track Use
Item 4: Flush out DOT 3 Brake fluid and go to Motul MTL100949 8068HL RBF 600 Factory Line Dot-4
I have a Mission Automotive Brake Bleeding device that makes this job easy.
Item 5: ADVAN A052 tires 205/45R17 on the factory BBS wheels. The 200 TW tires should provide better high speed stopping capability that current 300 TW tires in the dry. I'll need some future track rain tires.
Image of front brake lines attached