JICs $600, Roll bar w/petty bar $600, IL Chassis kit, more..
Posted: Wed Oct 12, 2011 6:15 am
Turning it back into a street car, so this stuff is up for sale.
I have a used set of JICs, about 30k on them. One of the rear shocks leaked some fluid and the first inch of travel is not so hot. Further down it works fine and actually drove just fine (never noticed until taking it off) but a rebuild would get it back to 100%. The rest appear to be just fine.
Some external corrosion as you can see, but all adjusters are proper and not crossthreaded or stuck. These are the FLT-A2, but the bottom collars are the TAR spec ones and do not crossthread (unlike the old ones). JIC will rebuild these for $600 for the entire set, so for $1200 you would have a great set of coilovers ready for another 50k or however long you go between rebuilds. Or just fix the one for much less.
Includes the JIC shipping box, all required bushings, and the wrench to adjust them.
Also have a single hoop roll bar, excellent shape, includes the rear panel pieces that are already trimmed, and the petty bar. Has two bolts for harness mounting. $600
IL chassis brace kit, not perfect cosmetically (some surface scratches from rocks and driveway) but perfect structurally. Complete with front bar. - 450
OMP ARS seat, blue with side mounts - $500 (local only)
AWR seat brackets for race seats. $150
G-Force cam lock harness (blue, 6 pt). $120
I have a used set of JICs, about 30k on them. One of the rear shocks leaked some fluid and the first inch of travel is not so hot. Further down it works fine and actually drove just fine (never noticed until taking it off) but a rebuild would get it back to 100%. The rest appear to be just fine.
Some external corrosion as you can see, but all adjusters are proper and not crossthreaded or stuck. These are the FLT-A2, but the bottom collars are the TAR spec ones and do not crossthread (unlike the old ones). JIC will rebuild these for $600 for the entire set, so for $1200 you would have a great set of coilovers ready for another 50k or however long you go between rebuilds. Or just fix the one for much less.
Includes the JIC shipping box, all required bushings, and the wrench to adjust them.
Also have a single hoop roll bar, excellent shape, includes the rear panel pieces that are already trimmed, and the petty bar. Has two bolts for harness mounting. $600
IL chassis brace kit, not perfect cosmetically (some surface scratches from rocks and driveway) but perfect structurally. Complete with front bar. - 450
OMP ARS seat, blue with side mounts - $500 (local only)
AWR seat brackets for race seats. $150
G-Force cam lock harness (blue, 6 pt). $120