Oh neat. I had plans to detail my truck on Saturday... But...
Long story short. Last month I bought a '95 NA. So now I have the NC and NA. There are some things I want to do the the NA... they mainly start with stiffening it up as it feels a bit like a noodle compared to the NC.
The car is in excellent condition, wait 'til you see it. But at some point it it's life, the original owner high-sided it and bent the driver's side frame rail. So the first thing I want to do to the car is add something like this:
http://www.good-win-racing.com/Mazda-Pe ... 00604.html
Do you have those in stock Brian? Do you think I can get lift time to install those? I thought about pulling the bit that's bent before installing these, but I might not need to. I think these can just be bolted in regardless, even if that one bent part would not allow a bolt.
If you have other chassis stiffening components you recommend as a whole, please let me know. We can also discuss more of it there.
Essentially, before power mods and all that, I want to get rid of every flex, squeak and rattle throughout the entire car. I do have on power mod that will also equate to a rattle-mod. The stock header's heat shield - the part that's on the bottom right before the cat, rattles like crazy. I could take off the heat shield and add an aftermarket, non-rattling one, but I could also consider a new header altogether.
I'll eventually need other chassis reinforcement components, including a roll bar. Another thing I want to do is replace all the bushings, but we can do that at a later time.
-Danny
Re: Our Next TECH DAY--SUNDAY JUNE 28th
Re: Our Next TECH DAY--THIS SATURDAY!
My car: The 1995 RallyWays Miata
Re: Our Next TECH DAY--THIS SATURDAY!
Hi Danny
BossFrog ships those Frame Rail kits direct to our customers, we don't keep them here. Ric at BossFrog says it could be here by Friday for $54 ship cost. Rocky is the man to talk to about lift time, if interested in getting those going, email me and I will pass that to him to get you started on setting reserved lift time.
BossFrog ships those Frame Rail kits direct to our customers, we don't keep them here. Ric at BossFrog says it could be here by Friday for $54 ship cost. Rocky is the man to talk to about lift time, if interested in getting those going, email me and I will pass that to him to get you started on setting reserved lift time.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: Our Next TECH DAY--THIS SATURDAY!
Hi Brian, nah, I don't want to pay $54 for shipping. Those are what seem like an easy install and I can do it in my garage, later on, no problem.
I'll wait on that for a bit because I'm considering a Boss Frog bar, and if I do go with that one I'll order both at once, slow shipping.
I'll shop around for a bit on your site and see what else I might like. Thanks.
I'll wait on that for a bit because I'm considering a Boss Frog bar, and if I do go with that one I'll order both at once, slow shipping.
I'll shop around for a bit on your site and see what else I might like. Thanks.
My car: The 1995 RallyWays Miata
Re: Our Next TECH DAY--THIS SATURDAY!
Please join us for our tech day this Saturday June 15th from 8-3ish.
Come talk shop, check out new products, work on your car and have some lunch with us.
Our Shop address is 2951 Garnet Ave San Diego, CA 92109.
Let me know if you have any questions. Hope to see you there!
Come talk shop, check out new products, work on your car and have some lunch with us.
Our Shop address is 2951 Garnet Ave San Diego, CA 92109.
Let me know if you have any questions. Hope to see you there!
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: Our Next TECH DAY--THIS SATURDAY!
Great day! Thanks to all who shared the fun day.
- Attachments
-
- techday5.JPG (141.45 KiB) Viewed 16364 times
-
- techday4.JPG (173.4 KiB) Viewed 16364 times
-
- techday3.JPG (134.86 KiB) Viewed 16364 times
-
- techday2.JPG (159.23 KiB) Viewed 16364 times
-
- techday1.JPG (148.93 KiB) Viewed 16364 times
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: Our Next TECH DAY--THIS SATURDAY!
Guests with two legs and four...
- Attachments
-
- Goodwin Tech Day 2.jpg (50.78 KiB) Viewed 16156 times
-
- Goodwin Tech Day 1.jpg (49.5 KiB) Viewed 16156 times
-
- techday6.JPG (151.89 KiB) Viewed 16189 times
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: Our Next TECH DAY--THIS SATURDAY!
Our Next Tech Day is Saturday October 12th at our San Diego Shop!!! 2951 Garnet Ave 92109
Come join us and spend the day talking Miata, enjoy some BBQ and hang out. Starts at 8am and usually winds down around 2pm.
If you want to use a lift email us BEFORE the event. Or call Rocky direct at (858) 273-2547 to schedule time.
Hope to see you there!
Come join us and spend the day talking Miata, enjoy some BBQ and hang out. Starts at 8am and usually winds down around 2pm.
If you want to use a lift email us BEFORE the event. Or call Rocky direct at (858) 273-2547 to schedule time.
Hope to see you there!
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: Our Next TECH DAY--THIS SATURDAY!
Thanks to all who joined the fun and made the Tech Day a fun day for all.
- Attachments
-
- TechDay6.JPG (102.21 KiB) Viewed 14857 times
-
- TechDay2.JPG (102.37 KiB) Viewed 14857 times
-
- Tech-Day3.jpg (74.41 KiB) Viewed 14857 times
-
- Tech-day1.jpg (113.96 KiB) Viewed 14857 times
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: Our Next TECH DAY--THIS SATURDAY!
More Tech Day Pics
- Attachments
-
- TECHday9.JPG (113.53 KiB) Viewed 14857 times
-
- TECHday8.JPG (118.85 KiB) Viewed 14857 times
-
- TechDay7.JPG (110.78 KiB) Viewed 14857 times
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com
Re: Our Next TECH DAY--THIS SATURDAY!
Customer Carl Lewis get the award for most done on our lifts today, Fender Roll, Full Tein Street Flex Coilover install and Enkei SBC Finish 17x9 with 255/40 Rival tires....all ready for next STR event.
- Attachments
-
- TECHDAY4.JPG (126.45 KiB) Viewed 14857 times
-
- Black-MX5-STR4.jpg (99.67 KiB) Viewed 14857 times
-
- Black-MX5-STR3.jpg (118.55 KiB) Viewed 14857 times
-
- Black-MX5-STR2.jpg (117.99 KiB) Viewed 14857 times
-
- Black-MX5-STR1.jpg (164.5 KiB) Viewed 14857 times
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Good-Win Racing
www.good-win-racing.com