New CSF Miata Radiators

Show off your lightweight high-performance wheels and see here what they look like on your Mazda before you buy.
Post Reply
Brian
Site Admin
Posts: 10553
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

New CSF Miata Radiators

Post by Brian »

We got one NC application unit to test fit....and we were blown away at the precision of the welds and fit, quality of the brackets and fin work, nicely done units! Some of their spec info below.



"B-Tube" technology - Unlike a regular oval shape "O" type radiator

tube, CSF uses a specially engineered tube in a shape of a "B".

These "B-tubes" are carefully formed and then brazed over the

seam to seal. CSF is able to use thinner and lighter aluminum

material (better cooling efficiency) because this design is actually

stronger than normal "O" shape tubes that are welded.

The design (inlet in the middle of tube that is seam brazed)

increases the heat transfer surface area of the tube by

approximately 15% over regular tubes. You get the efficiency of

2 smaller tubes vs. 1 large tube within the same space criteria.

With "B-tubes" you are able to get "dual liquid laminar flow."

The tubes are made from aircraft grade special clad aluminum

and are intricately formed on our high precision 6-stage tube-
forming mill. No other aftermarket radiator manufacturer uses

this technology. This technology raises the bar and sets the

standard for high performance radiator cores.
Attachments
CSF-NC.JPG
CSF-NC.JPG (68.17 KiB) Viewed 9690 times
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Brian
Site Admin
Posts: 10553
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Re: New CSF Miata Radiators

Post by Brian »

Pics of NA/NB application
Attachments
CSF6.jpeg
CSF6.jpeg (59.41 KiB) Viewed 9686 times
CSF5.jpeg
CSF5.jpeg (66.63 KiB) Viewed 9686 times
CSF4.jpeg
CSF4.jpeg (82.15 KiB) Viewed 9686 times
CSF3.jpeg
CSF3.jpeg (79.93 KiB) Viewed 9686 times
CSF1.jpeg
CSF1.jpeg (62.44 KiB) Viewed 9686 times
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
DavidP020
Posts: 10
Joined: Mon Jul 02, 2012 4:14 am

Re: New CSF Miata Radiators

Post by DavidP020 »

Hi Brian,

I overheated my engine this week-end during a trackday (NC Turbo), so it is time for me to install an enhanced radiator.

For my application, should I use a CSF or a Koyo radiator? Which one cools better ?

Thanks,
David.
Brian
Site Admin
Posts: 10553
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Re: New CSF Miata Radiators

Post by Brian »

Hi David

Both would serve you well, I have been a KOYO fan for many years....but I now think this CSF is even a bit better.
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
DavidP020
Posts: 10
Joined: Mon Jul 02, 2012 4:14 am

Re: New CSF Miata Radiators

Post by DavidP020 »

Thanks Brian. :)

I hope my engine is still ok, because some coolant went to cylinders (exhaust was cleaned). After the overheating, I drove 200 miles on highway, my coolant level didn't change and my exhaust has black dust again.
Brian
Site Admin
Posts: 10553
Joined: Tue Feb 15, 2005 11:44 am
Location: San Diego CA
Contact:

Re: New CSF Miata Radiators

Post by Brian »

New Delivery of CSF Radiators Just In Time to BEAT Summer Heat!
Attachments
CSF.jpg
Brian Goodwin
Good-Win Racing
www.good-win-racing.com
Post Reply